Quick Start Guide

AKZ 232 PRODUCT DESCRIPTION SHEET
GB
5019 310 53721
First-Last...
shelf positions
1.Control panel
2.Cooling fan* (not visible)
3.Top heating element (can be lowered)
4.Oven light
5.Round heating element (not visible)
6.Fan
7.Bottom heating element (not visible)
8.Oven door hinges
9.Oven cool door
*N.B.:
The cooling fan switches on only when the oven or cooktop has
reached a certain temperature. The fan can run at two speeds:
1) Full speed
2) Reduced speed
The fan speed depends on the temperature of the appliances.
After the oven and/or the cooktop switch off, the cooling fan may, however,
continue to run for a certain time to ensure proper cooling.
ACCESSORIES
Push-push knobs
 To use this type of knob, press it in the middle.
 Turn the knob to the desired position.
 Once cooking is over, turn the knob back to the position marked by 0 and press it again to restore it
to its initial setting.
COOKTOP FUNCTIONS TABLE
FOR A DESCRIPTION ON HOW TO USE THE OVEN, PLEASE REFER TO THE PROGRAMMER DESCRIPTION
SHEET.
OVEN FUNCTIONS TABLE
Function
symbol
Function
Preset
temperature/level
Function description
(see details in the user's manual)
0 OVEN OFF -
-
OVEN LIGHT -
To switch on the oven light.
MLTF
(Heat Maintenance)
35C
To keep a constant temperature,
either 35°C or 60°C.
STATIC 200C
To cook food at one shelf level. Preheating.
PASTRY
(Static+Fan)
175C
To cook on two shelf levels, at the same
temperature.
FAN 160C
To cook on more than one shelf level,
at the same temperature.
TURBOFAN 160C
To cook: large fruitcakes, stuffed vegetables,
timbales, poultry.
GRILL 3
To grill small pieces of meat, toast, etc.
TURBOGRILL
(Grill+Fan)
3
To grill large pieces of meat.
PROGRAMME P1
To bake pizza, bread, focaccia.
BOOSTER 200C
For fast preheating of the oven.
Grid
 Baking tray
Drip tray
Sliding shelves
 Catalytic panels
Function symbol Function
Function description
(see details in the users manual)
KEEP WARM Constant temperature, 60°C.
DUAL ZONE
To extend the heated area of the second part of oval or
rectangular cooking zones.
ICP To accelerate the heating of the selected cooking zone.
FAST BOILING To bring the water to the boil fast.
GENTLE HEAT Constant temperature, 35°C.
1-10 POWER LEVELS -
STARTING THE OVEN
When the oven is connected to the power supply for the first time, or re-connected after a power
failure,
the display shows  .
To start the oven:
turn
knob 1
to
0
.
press
button 2
.
The display shows --:--
.
1
2
3
45
67
8
1. Selector knob: to choose the oven functions.
2. Button to select and confirm the different operations (operate by single presses only).
3. Knob to set: time of day, cooking time, the time at which cooking should terminate, the
temperatures and the power levels (Function
P
).
4. Control knob for front, left cooking zone* 0 1 ... 10
5. Control knob for rear, left cooking zone* 0 1 ... 10
6. Control knob for rear, right cooking zone* 0 1 ... 10
7. Control knob for front, right cooking zone* 0 1 ... 10
8. Cooktop warning lights
*) The cooktop control knobs are not interchangeable. After cleaning or servicing, they must be returned to their original position s.
First
Last