Operation Manual

44
CAUTION:
1. Use an individual power circuit specifically for the air conditioner. As for the wiring method, refer to the
circuit diagram on the inside of the access door .
2. Check that the cable thickness conforms to the power source specification. (see the cable specification
table below).
3. Check the wires and make sure that they are all tightly fastened after cable connection.
4. Be sure to install an earth leakage circuit breaker in a wet or moist area.
Cable Specifications
Attention:
Accessibility to the plug must be guaranteed even after the installation of the appliance to
disconnect it in case of need. If not possible, connect appliance to a double-pole switching
device with contact separation of at least 3 mm placed in an accessible position even after
installation.
Power supply cable Power connecting cable
Ty p e
Normal cross
-sectional area
Ty p e
Normal cross
-sectional area
H07RN-F 2.5mm
2
X3 H05RN-F 1.0mm
2
X3
501932602031A:Layout 1 26-11-2009 15:04 Pagina 44