Operation Manual

30
REMOTE CONTROL FUNCTIONS
AND INDICATORS
1. ON/OFF BUTTON
Starts and/or Stops the appliance by pressing
this button.
2. MODE BUTTON
Used to select the operation mode.
3. FAN BUTTON
Used to select fan speed in sequence auto,
high, medium or low.
4-5.MODE BUTTON
Used to select the room temperature. Used
to set time in timer mode and real time clock.
6. BUTTON
Sets or cancels 6th sense operation, also
during stand-by.
7. SWING BUTTON
Stops or starts vertical adjustment louver
swinging and sets the desired up/down airflow
direction.
8. SLEEP BUTTON
Sets or cancels Sleep Mode operation.
9. BUTTON
When you press this button, the remote
control transmit signal of the actual room
temperature around it to the indoor unit
every 10 minutes. Therefore please keep the
remote controller in a location where it can
transmit the signal to the indoor unit properly.
Press once to set and press again to cancel.
10. CLOCK BUTTON
Used to set the current time.
11-12. TIMER BUTTON
Used to set or cancel the timer operation.
13. JET BUTTON
Used to start or stop the fast cooling.
(Fast cooling operates at high fan speed with
18°C set temp. automatically).
U
U
ON
OFF
1
2
6
7
5
8
9
4
3
13
12
11
10
INDICATOR SYMBOLS ON RC DISPLAY
Cooling indicator
Dry indicator
Fan only indicator
Heating indicator
Auto fan speed
High fan speed
Medium fan speed
Low fan speed
indicator
Sleep indicator
indicator
Jet indicator
Signal transmission
Display set timer
Display current time
Display set temperature
U
U
O
O
N
OF F
501932602031A:Layout 1 26-11-2009 15:03 Pagina 30