Instruction for Use

45
Cable connection
1.
Remove the handle on the right side plate of the outdoor
unit (one screw).
2.
Remove the cable clamp, connect the power connection
cable with the terminal on the connecting board and fasten
it. The fitting line distribution must be consistent with the
indoor unit.
3.
Use cable clamp to fasten the cable connection.
4.
Confirm the fitting lines are fixed.
5.
Install the handle (fastened with one screw).
Notes:
•
Improper line connection may cause failure of some electrical
components and parts.
•
When fastening the cable, leave some slack for the cable
between the connection point and the fixing point.
Front side plate
Black
Control cable
Control cable
Power cable
Power cable
Brown
Blue
Power supply
Yellow/
Green
Yellow/
Green
Yellow/Green
Brown
Blue
Blue
Black
Brown
32602007GB.fm Page 45 Thursday, February 1, 2007 5:16 PM