Instruction for Use

OPERATING MODE DESCRIPTION
General Operation:
1. Turning on
Press button, when the appliance receives the
signal, the RUNNING indicator on indoor unit
dispaly lights up. During mode changes wait a few
seconds and repeat the operation if the appliance
does not respond at once. When setting the
heating operation, air flow will start after 2-5
minutes.
2. Selecting mode
Each time the Mode button is pressed, the
operation mode is changed in sequence:
6th SENSE mode
COOLING mode
DEHUMIDIFYING mode
FAN only mode
HEATING mode
3. Setting FAN speed
Each time the Fan button is pressed, the fan speed
is changed in sequence:
Auto fan speed
Low fan speed
Medium fan speed
High fan speed
Only low fan speed is available under
Dehumidifying mode.
4. Setting temperature
Press once to raise temperature setting by 1 °C
Press once to raise temperature setting by 1 °C
When pressing or button and hold it down,
the number will change rapidly.
Range of available set temperature: 16°C~30°C
*Note: In 6th SENSE mode the temperature
cannot be set.
FAN
FAN
FAN
FAN
11