Instruction for Use

4. Connecting the Cable
• Indoor Unit
1) Open the front panel, remove the covering plate by
loosening the screw.
2) Connect the power connecting cord to the indoor
unit by connecting the wires to the terminals on the
control board individually as follows.
3) Secure the power connecting cord on the control
board with cable clamp.
4) Refit the covering plate and tighten the screw.
NOTE: (depending on the model) It is necessary to
remove the cabinet to perform connections with the
indoor unit terminal.
• Outdoor Unit
1) Remove the access door from the unit by loosening the screw. Unscrew the cable clamp, connect the
wires to the terminals on the control board individually in accordance with the indoor unit connection.
2) Secure the power connecting cord on the control board with cable clamp.
3) Refit the access door in the original position and tighten the screw.
NOTE: (depending on the model) It is necessary to remove the cabinet to perform connections with the
indoor unit terminal.
Covering plate
Power Connection
Cable
Blue
Black Yellow
Green
Brown
Cable
Clamp
Power
connection
cable
49
L
N
L
L
AMD 066, AMD 067
Handle
To unit A
To unit B
Front side plate
Power
cord
connecting
cable
To the power supply
POWER
Indoor unit
Outdoor unit
connecting
cable