Instruction for Use

JET mode

• JET mode is used to start or stop fast cooling or

fast heating.

will display on remote control under this

mode. The appliance will blow at super high fan

speed to cool or heat your room quickly and

effectively.

•In JET mode, you can set temperature and

airflow direction

Note:

• Jet function is not available in 6th Sense, Fan

only, and Dehumidifying mode.

• When switching the mode or changing fan

speed, this function will be canceled

automatically.

CLOCK function

You can set clock by pressing CLOCK button, then

using and buttons to set the correct time,

press CLOCK button again, the clock is set.

Pressing CLOCK button, signal blink. Within 5

seconds, the value can be adjusted

Press once to raise time setting by 1 minute

Press once to lower time setting by 1 minute

if continuously press or buttons, the

number will change rapidly.

12:00 is the defaulted time to display after insert

batteries

SLEEP mode

This function gives you a more comfortable

environment for sleep.

In SLEEP mode, will display on remote

control,

• Under COOLING or DEHUMIDIFYING

operation, the appliance will automatically adjust

the set temperature raise 1°C for the first hour

and another 1°C for the second hour, then

remain constant

• Under HEATING operation, the appliance will

automatically adjust the set temperature lower

1°C for the first hour and another 1°C for the

second hour, then remain constant.

Note:

• Fan speed and airflow direction can be adjusted.

• Under FAN only and 6th SENSE mode, this

function is not available.