Instructions for installation and use WASHING MACHINE Contents EN English,1 PL Polski,13 CZ Česky,25 EN Installation, 2-3 Unpacking and levelling Connecting the electricity and water supplies Technical data Description of the machine, 4-5 RO Română,37 HU Magyar,49 Touch control panel Running a wash cycle, 6 Wash cycles and options, 7 Table of wash cycles Wash options AQUALTIS AQ114D 697D Detergents and laundry, 8 Detergent Preparing the laundry Washing recommendations Precautions and advice, 9
Installation EN ! This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, given away or moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it. ! Read these instructions carefully: they contain vital information relating to the safe installation and operation of the appliance.
Connecting the drain hose 65 - 100 cm Connect the drain hose to drain duct piping or a wall drain located between 65 and 100 cm above the floor, making sure it is not bent at all. ! Do not use extension cords or multiple sockets. EN ! The cable should not be bent or compressed. ! The power supply cable and plug must only be replaced by authorised technicians. Warning! The company shall not be held responsible in the event that these regulations are not respected.
Description of the machine EN CONTROL PANEL PORTHOLE DOOR PORTHOLE DOOR HANDLE DIRECT INJECTION SYSTEM The washing machine features the innovative “Direct Injection” technology that quickly solubilises the detergent and efficiently activates all the various components. The system guarantees the complete use and dissolution of the detergent, which is mixed with water before reaching the garments.
START/PAUSE button Touch control panel WASH CYCLE SELECTOR knob with indicator light SPIN button M2 M1 TEMPERATURE button ECO indicator light EN WASH CYCLE PHASE icons DISPLAY Button with ON/OFF indicator light M3 OPTION buttons CONTROL PANEL LOCK DELAYED START button with indicator light button DOOR LOCKED indicator light Button with ON/OFF indicator light: press this briefly to switch the machine on or off. The green indicator light indicates that the machine is switched on.
Running a wash cycle EN WARNING: before you use the washing machine for the first time, run a wash cycle with detergent and no laundry, using the 90° cottons cycle without pre-wash. To remove the delayed start option, press the button until the display shows the text OFF; the symbol will disappear. 1. SWITCH THE MACHINE ON. Press the button.
Wash cycles and options Cycle duration Max. load (kg) Synthetics Resistant 60° 800 5 48 1,12 58 120’ Synthetics Resistant (4) 40° 800 5 48 0,67 54 100’ Coloureds Intensive 40° 1600 9 - - - 175’ Multi Colour 20° 1600 - 9 - - - 185’ Darks 30° 800 - 6 - - - 80’ - - - - - 2 - - - 20’ Duvets: for down-stuffed garments. 30° 1200 - 3,5 - - - 110’ Bed&Bath for bedlinen and towels. Max. Max. speed temp.
Detergents and laundry EN Detergent The type and quantity of detergent required depend on the type of fabric you are washing (cotton, wool, silk, etc.), as well as its colour, the washing temperature, the level of soiling and the hardness of the water in the area. Measuring out the detergent carefully will avoid wastage and help to protect the environment: although they are biodegradable, detergents still contain ingredients which alter the balance of nature.
Precautions and tips ! The machine was designed and constructed in accordance with international safety regulations. The following information is provided for safety reasons and must therefore be read carefully. General safety • This appliance was designed for domestic use only.
Care and maintenance EN Cutting off the water and electricity supplies • Turn off the water tap after every wash cycle. This will limit wear on the hydraulic system in the machine and help to prevent leaks. • Unplug the appliance when cleaning it and during all maintenance work. Cleaning the machine The outer parts and rubber components of the appliance can be cleaned using a soft cloth soaked in lukewarm soapy water. Do not use solvents or abrasives.
Trouble shooting Your washing machine could occasionally fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be solved easily using the following list. Problem: Possible causes / Solutions: The washing machine does not switch on. • The appliance is not plugged into the socket fully, or not enough to make contact. • There is no power in the house. The wash cycle does not start. • • • • The door is not closed properly.
Assistance EN Before calling for Assistance: • Check whether you can solve the problem by yourself (see “Trouble shooting”); • Restart the wash cycle to check whether the problem has been solved; • If it has not, contact the Authorised Technical Assistance Service. ! If the washing machine has been installed or used incorrectly, you will have to pay for the call-out service. ! Always request the assistance of authorised technicians.
Instrukcja instalacji i obsługi PRALKA Spis treści PL Polski PL Instalacja, 14-15 Rozpakowanie i wypoziomowanie Podłączenia hydrauliczne i elektryczne Dane techniczne Opis urządzenia, 16-17 Panel sterowania “touch control” Jak wykonać cykl prania, 18 Programy i opcje, 19 Tabela programów Opcje Środki piorące i bielizna, 20 AQUALTIS AQ114D 697D Środek piorący Przygotowanie bielizny Zalecenia dotyczące prania Zalecenia i środki ostrożności, 21 Ogólne zasady bezpieczeństwa System równoważenia ładu
Instalacja PL ! Należy zachować niniejszą książeczkę, aby móc z niej skorzystać w każdej chwili. W przypadku sprzedaży, odstąpienia lub przeprowadzki należy upewnić się, że pozostanie razem z pralką. ! Należy uważnie przeczytać instrukcję obsługi: zawiera ona ważne informacje dotyczące instalacji oraz właściwego i bezpiecznego użytkowania pralki. !W kopercie zawierającej niniejszą instrukcję, oprócz gwarancji, znajdują się detale pomagające przy instalacji. Rozpakowanie i wypoziomowanie Rozpakowanie 1.
Podłączenie przewodu odpływowego 65 - 100 cm Podłączyć rurę odpływową wody do kanalizacji lub otworu spustowego w ścianie umieszczonego na wysokości od 65 cm do 1 m od ziemi, unikając zginania jej. ! Nie używać przedłużaczy ani wtyczek wielokrotnych. PL ! Kabel nie powinien być zgięty ani zgnieciony. ! Kabel zasilania elektrycznego oraz wtyczka mogą być wymieniane wyłącznie przez upoważnionych techników. Uwaga! Producent nie ponosi żadnej odpowiedzialności, jeśli powyższe normy nie będą przestrzegane.
Opis urządzenia SYSTEM DIRECT INJECTION Pralka pracuje z wykorzystaniem innowacyjnej PULPIT STEROWANIA technologii “Direct Injection”, która w szybki sposób rozpuszcza środek piorący, aktywując w najlepszy możliwy sposób jego poszczególne składniki. System gwarantuje pełne wykorzystanie i rozpuszczenie środka piorącego, dzięki jego wymieszaniu z wodą zanim dotrze on do bielizny.
Panel sterowania “touch control” Pokrętło PROGRAMÓW M2 M1 Przycisk WIROWANIE Przycisk TEMPERATURY Przycisk z kontrolką START / PAUSE Kontrolka EKO PL Ikony FAZY PRANIA Ekran Przycisk z kontrolką ON/OFF Przyciski M3 OPCJI Przycisk OPÓŹNIONE URUCHOMIENIE Kontrolka LOCK Przycisk oraz kontrolka BLOKADA PRZYCISKÓW Przycisk z kontrolką ON/OFF: nacisnąć na chwilę przycisk w celu włączenia lub wyłączenia maszyny. Zielona kontrolka wskazuje, że maszyna jest włączona.
Jak wykonać cykl prania PL UWAGA: kiedy po raz pierwszy używa się pralki należy wykonać cykl prania bez wsadu, ale z użyciem środka piorącego nastawiając program bawełny 90° bez prania wstępnego. ukaże się napis: „Koniec za:” i pozostały czas do zakończenia cyklu. W celu usunięcia opóźnionego uruchomienia wciskać przycisk aż do pojawienia się napisu OFF; symbol zgaśnie. 1. WŁĄCZENIE MASZYNY. Wcisnąć przycisk .
Programy i opcje Środek zmiękczający Syntetyczne Odporne 60° 800 5 48 1,12 58 120’ Syntetyczne Odporne (4) 40° 800 5 48 0,67 54 100’ Kolory Intensywny 40° 1600 9 Kolory 20° 1600 - 9 - Ciemne 30° 800 - 6 - - - - - - 2 - - - 20’ Kołdry: do odzieży ocieplanej gęsim puchem. 30° 1200 - 3,5 - - - 110’ Bed&Bath: do bielizny poœcielowej i k¹pielowej. Opis programu Odśwież.
Środki piorące i bielizna PL Środek piorący Wybór oraz ilość środka piorącego zależne są od rodzaju tkaniny (bawełna, wełna, jedwab...), od koloru, od temperatury prania, od stopnia zabrudzenia oraz od twardości wody. Dokładne dozowanie środka piorącego zapobiega marnotrawstwu i przyczynia się do ochrony środowiska: środki piorące, mimo że ulegają biodegradacji, zawsze zawierają składniki, które zakłócają równowagę środowiska naturalnego.
Zalecenia i środki ostrożności ! Pralka została zaprojektowana i wyprodukowana zgodnie z międzynarodowymi przepisami bezpieczeństwa. Niniejsze ostrzeżenia zostały tu zamieszczone ze względów bezpieczeństwa i należy je uważnie przeczytać. Ogólne zasady bezpieczeństwa • Urządzenie to zostało zaprojektowane wyłącznie do użytkowania w warunkach domowych.
Utrzymanie i konserwacja PL Odłączenie wody i prądu elektrycznego • Zamknąć kurek dopływu wody po każdym praniu. Zmniejsza się w ten sposób zużycie instalacji hydraulicznej pralki oraz eliminuje się niebezpieczeństwo przecieków. • Wyjąć wtyczkę z kontaktu przed przystąpieniem do czyszczenia pralki oraz podczas wykonywania czynności konserwacyjnych. Czyszczenie maszyny Obudowę zewnętrzną i gumowe części pralki należy myć wilgotną ściereczką zmoczoną w letniej wodzie z mydłem.
Nieprawidłowości w działaniu i sposoby ich usuwania Może się zdarzyć, że pralka nie działa. Przed wezwaniem Serwisu Technicznego (patrz „Serwis Techniczny”) należy sprawdzić, czy problemu nie da się łatwo rozwiązać przy pomocy poniższego wykazu. PL Nieprawidłowości w działaniu: Możliwe przyczyny/Porady: Pralka nie włącza się. • Wtyczka nie jest włączona do gniazdka lub jest wsunięta za słabo, w taki sposób, że nie ma styku. • W domu nie ma prądu. Cykl prania nie rozpoczyna się.
Serwis techniczny PL Przed skontaktowaniem się z Serwisem Technicznym: • Sprawdzić, czy problemu nie można rozwiązać samodzielnie (patrz „Anomalie i środki zaradcze”); • Ponownie uruchomić program i sprawdzić, czy problem nie zniknął; • W przeciwnym razie wezwać Autoryzowany Serwis Techniczny. ! W przypadku błędnego zainstalowania i nieprawidłowego używania pralki interwencja serwisu będzie płatna. ! Nigdy nie wzywać nieautoryzowanych techników.
Návod k instalaci a použití PRAČKA Obsah CZ Česky CZ Instalace, 26-27 Rozbalení a vyrovnání do vodorovné polohy Připojení k elektrické a k vodovodní síti Technické údaje Popis zařízení, 28-29 Ovládací panel “touch control” Spuštení pracího cyklu, 30 Programy a volitelné funkce, 31 Tabulka programů Možnosti Prací prostředky a prádlo, 32 AQUALTIS AQ114D 697D Prací prostředek Příprava prádla Rady pro praní Opatření a rady, 33 Základní bezpečnostní pokyny Systém automatického vyvážení náplně Likvid
Instalace CZ ! Je velmi důležité uschovat tento návod za účelem jeho další konzultace. V případě prodeje, darování nebo přestěhování pračky se ujistěte, že zůstane uložen v její blízkosti. ! Pozorně si přečtěte uvedené pokyny: Obsahují důležité informace týkající se instalace, použití a bezpečnosti při práci. ! V obálce s tímto návodem mužete najít kromě záruky také součástky potřebné k instalaci. Rozbalení a vyrovnání do vodorovné polohy Rozbalení 1.
Připojení vypouštěcí hadice 65 - 100 cm Připojte vypouštěcí hadici k odpadovému potrubí nebo k odpadu ve stěně, který se nachází od 65 do 100 cm nad zemí; jednoznačně zamezte jejímu ohybu. ! Kabel nesmí být ohnutý ani stlačený. CZ ! Výměna kabelu a zástrčky musí být svěřena výhradně autorizovanému technickému personálu. Upozornění! Výrobce neponese žádnou odpovědnost za následky nerespektování uvedených předpisů.
Popis zařízení CZ DVÍŘKA S PRŮZOREM OVLÁDACÍ PANEL MADLO DVÍŘEK S PRŮZOREM SYSTÉM DIRECT INJECTION Pračka je vybavena inovativní technologií „Direct Injection“, která rychle rozpouští prací prostředek a aktivuje co nejlépe všechny jeho jednotlivé složky. Systém zaručuje kompletní použití a rozpuštění pracího prostředku díky jeho smíšení s vodou ještě dříve, než se dostane na prádlo.
Ovládací panel “touch control” Otočný ovladač PROGRAMŮ M2 Tlačítko s kontrolkou START/PAUSE Tlačítko ODSTŘEĎOVÁNÍ Tlačítko TEPLOTA M1 CZ Ikony Kontrolka FÁZE PRANÍ EKO DISPLEJ Tlačítko s kontrolkou ON/OFF M3 Tlačítko Tlačítka VOLITELNÉ FUNKCE Tlačítko skontrolkou ON/OFF: Krátké stisknutí tohoto tlačítka slouží k zapnutí nebo vypnutí zařízení. Zelená kontrolka poukazuje na to, že je zařízení zapnuté. Pro vypnutí pračky během praní je třeba držet tlačítko stisknuté déle, přibližně 3 sek.
Spuštění pracího cyklu CZ POZNÁMKA: při prvním použití pračky spusťte prací cyklus bez prádla, s pracím práškem a nastaveným pracím programem pro vlnu 90°C, bez předpírky. 1. ZAPNUTÍ ZAŘÍZENÍ. Stisknete tlacítko . Všechny kontrolky se rozsvítí na dobu 1 sekundy a na displeji se zobrazí nápis AQUALTIS; kontrolka tlacítka zustane rozsvícena stálým svetlem a kontrolka START/PAUSE bude blikat. 2. ZVOLTE PRACÍ PROGRAM.
Programy a volitelné funkce Doba trvání cyklu Max. rychlost (otácky za minutu) Aviváž Total water lt Max. teplot (°C) Praní Max.
Prací prostředky a prádlo CZ Prací prostředek Volba druhu a množství pracího prostředku závisí na druhu tkaniny (bavlna, vlna, hedvábí…), na barvě, teplotě praní, stupni znečištění a na tvrdosti vody. Správné dávkování pracího prostředku zabraňuje plýtvání a šetří životní prostředí: i když se jedná o biodegradabilní látky, prací prostředky narušují přirozenou rovnováhu v přírodě. Doporučuje se: • používat práškové prací prostředky pro prádlo z bílé bavlny a pro předpírku.
Opatření a rady ! Pračka byla navržena a vyrobena v souladu s platnými mezinárodními bezpečnostními předpisy. Tato upozornění jsou uváděna z bezpečnostních důvodů a je třeba si je pozorně přečíst. Základní bezpečnostní pokyny • Toto zařízení bylo navrženo výhradně pro použití v domácnosti.
Údržba a péče CZ Uzavření přívodu vody a vypnutí elektrického napájení • Po každém praní uzavřete přívod vody. Tímto způsobem dochází k omezení opotřebení rozvodu vody zařízení a ke snížení nebezpečí úniku vody. • Před zahájením čištění zařízení a během operací údržby je třeba vytáhnout zástrčku přívodního kabelu ze zásuvky. Čištění zařízení Vnější části a části z gumy mohou být čištěny hadrem navlhčeným ve vlažné vodě a saponátu. Nepoužívejte rozpouštědla ani abrazivní látky.
Poruchy a způsob jejich odstranění Může se stát, že zařízení nebude fungovat. Dříve než zatelefonujete na servisní službu (viz “Servisní služba”), zkontrolujte, zda se nejedná o problém, který lze snadno vyřešit s pomocí následujícího seznamu. CZ Poruchy: Možné příčiny / Způsob jejich odstranění: Zařízení nelze zapnout. • Zástrčka není zasunuta v zásuvce nebo není zasunuta natolik, aby došlo ke spojení kontaktů. • V celém dome je vypnutý proud. Nedochází k zahájení pracího cyklu.
Servisní služba CZ Před přivoláním Servisní služby: • Zkontrolujte, zda nejste schopni poruchu odstranit sami (viz „Poruchy a způsob jejich odstranění); • Znovu uved’te do chodu prací program, abyste ověřili, zda byla porucha odstraněna; • V případě negativního výsledku se obrat’te na Servisní službu nebo na specializovaný technický personál. ! V případě chybné instalace nebo nesprávného použití pračky bude třeba za servisní zásah zaplatit.
Instrucţiuni de instalare MAŞINĂ DE SPĂLAT RUFE şi folosire Sumar RO Română RO Instalare, 38-39 Despachetare şi punere la nivel Racorduri hidraulice şi electrice Date tehnice Descrierea maşinii de spălat, 40-41 Panoul de comenzi “touch control” Cum se desfăşoară un ciclu de spălare, 42 Programe şi opţiuni, 43 Tabel programe Opţiuni Detergenţi şi rufe, 44 AQUALTIS AQ114D 697D Detergent Pregătirea rufelor Recomandări pentru spălare Precauţii şi sfaturi, 45 Norme de protecţie şi siguranţă generale Si
Instalare RO ! Este important să păstraţi acest manual pentru a-l putea consulta în orice moment. În caz de vânzare, cedare sau mutare, asiguraţi-vă că acesta rămâne cu maşina de spălat rufe. ! Citiţi cu atenţie instrucţiunile: veţi găsi informaţii importante cu privire la instalare, la folosire şi la siguranţă. ! În plicul unde se află manualul veţi găsi, în afara garanţiei, şi câteva piese care vă vor servi la instalare. Despachetare şi punere la nivel Scoaterea din ambalaj 1.
Conectarea furtunului de golire 65 - 100 cm Conectaţi furtunul de golire a apei la canalizare sau la un robinet de golire pus pe perete, la o distanţă de 65-100 cm de la pământ, evitând îndoirea sa.; ! Cablul nu trebuie să fie îndoit sau comprimat. RO ! Cablul de alimentare sau ştecherul trebuie să fie înlocuite doar de tehnicieni autorizati ai retelei de service indicata de producator in certificatul de garantie.
Descrierea maşinii de spălat RO PANOUL DE COMANDĂ UŞA MÂNER UŞĂ SISTEMUL DIRECT INJECTION Maşina de spălat este dotată cu o tehnologie inovatoare “Direct Injection” care solubilizează rapid detergentul, activând în mod optim toate componentele acestuia. Sistemul garantează utilizarea şi dizolvarea completă a detergentului datorită amestecării sale cu apa înainte de a ajunge la rufe.
Tastă cu indicator luminos Panoul de comenzi “touch control” Selector PROGRAME M2 START/PAUSE Tasta CENTRIFUGARE M1 Tasta Indicator luminos TEMPERATURĂ ECO RO Icoane ETAPE DE SPĂLARE DISPLAY Buton cu led ON/OFF M3 Buton cu led Taste OPŢIUNI Tasta PORNIRE ÎNTÂRZIATĂ Buton cu led ON/OFF: apăsaţi scurt butonul pentru a porni sau opri maşina de spălat. Ledul verde vă arată că maşina este în funcţiune.
Cum se desfăşoară un ciclu de spălare RO NOTĂ: la prima folosire a maşinii de spălat, efectuaţi un ciclu de spălare fără rufe, dar cu detergent, cu programul pentru bumbac, la 90°, fără prespălare. Pentru a anula pornirea întârziată, apăsaţi tasta corespunzătoare până când pe display apare mesajul OFF; în acel moment se va stinge şi ledul . 1. PUNEREA ÎN FUNCŢIUNE A MAŞINII. Apăsaţi tasta .
Programe şi opţiuni Viteza max. (rotaþii pe minut) Prespãlare Spãlare Balsam rufe Sarcina Max. (Kg) Umiditate reziduală % Consum energie kWh Apă totală lt Durata ciclului de spalare RO Detergenþi Temp. max.
Detergenţi şi rufe RO Detergent Alegerea detergentului precum şi cantitatea acestuia depind de tipul de material (bumbac, lână, mătase,...), de culoarea rufelor, de temperatura de spălare, de gradul de mizerie şi de conţinutul de calcar al apei (de duritatea ei). Dozarea corectă a detergentului evită consumul excesiv şi protejează mediul înconjurător: deşi sunt biodegradabili, detergenţii conţin elemente care alterează echilibrul naturii.
Precauţii şi sfaturi ! Maşina de spălat a fost proiectată şi construită conform normelor internaţionale de siguranţă. Aceste avertizări sunt furnizate din motive de siguranţă şi trebuie să fie citite cu atenţie. Norme de protecţie şi siguranţă generale • Acest aparat a fost conceput exclusiv pentru utilizarea în locuinţe.
Întreţinere şi curăţire RO Întreruperea alimentării cu apă şi curent electric • Închideţi robinetul de apă după fiecare spălare. Se limitează astfel uzura instalaţiei hidraulice a maşinii de spălat şi se elimină pericolul scurgerilor. • Scoateţi ştecărul din priza de curent atunci când curăţaţi maşina de spălat şi când se efectuează lucrări de întreţinere.. Curăţarea maşinii de spălat Partea externă şi părţile din cauciuc pot fi curăţate cu o lavetă înmuiată în apă călduţă şi săpun.
Anomalii şi remedii Se poate întâmpla ca maşina de spălat să nu funcţioneze. Înainte de a apela serviciul de Asistenţă (a se vedea “Asistenţa”), verificaţi dacă nu este vorba de o problemă uşor de rezolvat: Anomalii: Cauze posibile / Rezolvare: Maşina nu porneşte. • Ştecărul nu este introdus în priza de curent, sau nu face contact. • Aveţi o pană de curent la domiciliu. Ciclul de spălare nu porneşte. • • • • Uşa nu este bine închisă. Butonul START/PAUSE nu a fost apăsat.
Asistenţă RO Înainte de a lua legătura cu Asistenţa: • Verificaţi dacă puteţi remedia singuri anomalia (vezi Anomalii şi remedii); • Porniţi din nou programul pentru a controla dacă inconvenientul a fost eliminat; • În caz contrar, apelaţi Serviciul de Asistenţă Tehnică Autorizat. ! În cazul instalării greşite sau al folosirii incorecte a maşinii de spălat, intervenţia serviciului de asistenţă se va face cu plată. ! Nu apelaţi niciodată la persoane neautorizate.
Beépítési és használati utasítás MOSÓGÉP Összefoglalás HU Magyar HU Üzembe helyezés, 50–51 Kicsomagolás és vízszintbe állítás Víz- és elektromos csatlakozás Műszaki adatok Karbantartás és ápolás, 52 A víz elzárása és az elektromos áram kikapcsolása A készülék tisztítása A mosószer-adagoló fiók tisztítása A dob tisztítása A szivattyú tisztítása A vízbevezető cső ellenőrzése Óvintézkedések és tanácsok, 53 AQUALTIS AQ114D 697D Általános biztonság A bepakolt ruhák kiegyensúlyozására szolgáló rendszer
Üzembe helyezés HU ! E kézikönyv megőrzése azért fontos, hogy bármikor elővehesse, és megnézhesse. A készülék eladása, továbbadása, vagy költöztetése esetén figyeljen arra, hogy a kézikönyv a mosógéppel maradjon. ! Figyelmesen olvassa el az utasításokat: fontos információkat tartalmaznak az üzembe helyezésről, a használatról és a biztonságról. ! A garancia mellett az üzembehelyezéshez szükséges eszközök is a kézikönyvet tartalmazó csomagban találhatók. Kicsomagolás és vízszintbe állítás Kicsomagolás 1.
A leeresztőcső csatlakoztatása 65 - 100 cm merülnie. A leeresztőcsövet csatlakoztassa lefolyóhoz vagy a padlótól 65 és 100 cm közötti magasságban lévő fali lefolyószifonhoz, vigyázva arra, nehogy megtörje! A leeresztőcsövet a mosdó vagy a kád szélére is akaszthatja úgy, hogy a tartozékok között lévő vezetőt a csaphoz erősíti (lásd ábra). A leeresztőcső szabad végének nem szabad vízbe ! Toldások használata nem javasolt.
Karbantartás és ápolás HU A víz elzárása és az elektromos áram kikapcsolása • Minden mosás után zárja el a vízcsapot. Így kíméli a készülék vízrendszerét, és megszünteti a vízszivárgás kockázatát. • A készülék tisztítása vagy karbantartása esetén húzza ki a hálózati csatlakozódugót az aljzatból! A készülék tisztítása A külső részeket és a gumi részeket langyos szappanos vizes ronggyal tisztíthatja.
Óvintézkedések és tanácsok ! A készüléket a nemzetközi biztonsági szabványoknak megfelelően tervezték és gyártották. Ezeket a figyelmeztetéseket biztonsági okokból írjuk le, és figyelmesen el kell olvasni őket Általános biztonság • Ez a készülék háztartási használatra lett tervezve.
A készülék leírása „DIRECT INJECTION” RENDSZER A mosógép egy, a mosószert gyorsan feloldó, „Direct KEZELŐPANEL Injection” nevű, közvetlen befecskendezéses innovatív technológiával van ellátva, ami a mosószer valamennyi összetevőjét a lehető legjobb módon aktiválja. Azáltal, hogy a rendszer a mosószert már azelőtt összekeveri vízzel, hogy az a ruhadarabokkal érintkezne, gondoskodik arról, hogy a mosószer teljesen fel legyen használva és fel legyen oldva.
Érintőgombos kezelőpanel PROGRAMOK tekerőgomb M2 START/PAUSE CENTRIFUGA gomb M1 HŐMÉRSÉKLET gomb HU jelzőlámpás gomb ECO jelzőlámpá MOSÁSI FÁZIS szimbólumok Kijelző ON/OFF jelzőlámpás gomb OPCIÓK M3 gombok ON/OFF jelzőlámpás gomb : a készülék be- vagy kikapcsolásához nyomja meg röviden ezt a gombot. A készülék bekapcsolását zöld jelzőlámpa jelzi. A mosógép mosás közben történő leállításához hosszan, kb.
A mosási ciklusok végrehajtása HU MEGJEGYZÉS: a mosógép első használatakor végezzen el egy üres mosást 90°C-os pamutprogrammal, előmosás nélkül, mosószer használatával. 1. A KÉSZÜLÉK BEKAPCSOLÁSA. Nyomja meg a gombot! Az összes lámpa felvillan 1 másodpercre és a kijelzőn az AQUALTIS felirat jelenik meg; a nyomógomb lámpája égve marad, míg az START/ PAUSE lámpa villogni kezd. 2. VÁLASSZA KI A PROGRAMOT.
Programok és opciók Programidő Összes víz lt Szimbólum Programleírás Max. hőm (°C) Max. sebesség (ford./ perc) Öblítő Max.
Mosószerek és mosandók HU Mosószer A mosószer kiválasztása és adagolt mennyisége a szövet típusának (pamut, gyapjú, selyem...), színének, a mosási hőmérsékletnek, a szennyezettség mértékének, valamint a víz keménységének a függvénye. A mosószer megfelelő adagolása megakadályozza a pazarlást és kíméli a környezetet: még, ha biológiailag lebomló fajtájúk is, a mosószerek olyan összetevőket tartalmaznak, amelyek megváltoztatják a természet egyensúlyát.
Rendellenességek és elhárításuk Előfordulhat, hogy a készülék nem működik. Mielőtt felhívná a szervizt (lásd „Szerviz”), ellenőrizze, hogy nem olyan problémáról van-e szó, amely a következő lista segítségével egyszerűen megoldható. HU Rendellenességek: Lehetséges okok / megoldás: A készülék nem kapcsol be. • A hálózati csatlakozódugó nincs bedugva az aljzatba, vagy nem eléggé ahhoz, hogy jól érintkezzen. • Nincs áram a lakásban. A mosási ciklus nem indul el. • • • • Az ajtó nincs jól becsukva.
Szerviz 195139802.00 11/2015 HU Mielőtt a szervizhez fordulna, tegye a következőket: • Győződjön meg arról, hogy a hibát nem tudja saját maga is elhárítani (lásd „Rendellenességek és elhárításuk”); • Indítsa el újból a programot, hogy lássa, elhárította-e a hibát; • Amennyiben nem sikerült, forduljon a hivatalos szakszervizhez. ! A mosógép hibás beszerelése vagy nem megfelelő használata esetén a szerviz beavatkozása pénzbe kerülhet.