Instructions for installation and use WASHING MACHINE Contents EN English,1 IT Italiano,25 EN Installation, 2-3 Unpacking and levelling Connecting the electricity and water supplies Technical data Description of the machine, 4-5 Touch control panel Running a wash cycle, 6 Wash cycles and options, 7 Table of wash cycles Wash options Detergents and laundry, 8 AQUALTIS AQS73D 29 Detergent Preparing the laundry Washing recommendations Load balancing system Precautions and advice, 9 General safety Dis
Installation EN ! This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, given away or moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it. ! Read these instructions carefully: they contain vital information relating to the safe installation and operation of the appliance.
Connecting the drain hose 65 - 100 cm Connect the drain hose to drain duct piping or a wall drain located between 65 and 100 cm above the floor, making sure it is not bent at all. ! Do not use extension cords or multiple sockets. EN ! The cable should not be bent or compressed. ! The power supply cable and plug must only be replaced by authorised technicians. Warning! The company shall not be held responsible in the event that these regulations are not respected.
Description of the machine EN PORTHOLE DOOR CONTROL PANEL PORTHOLE DOOR HANDLE KICK STRIP PORTHOLE DOOR Always use the handle to open the porthole door (see figure). 3. extra compartment: Bleach ! The use of extra compartment 3 excludes the prewash function. washing additives compartment: for fabric softener or liquid additives. We recommend that the maximum level indicated by the grille is not exceeded, and that concentrated fabric softeners are diluted.
START/PAUSE button Touch control panel WASH CYCLE SELECTOR knob with indicator light SPIN button M2 M1 TEMPERATURE button ECO indicator light EN WASH CYCLE PHASE icons DISPLAY Button with ON/OFF indicator light M3 OPTION buttons CONTROL PANEL LOCK DELAYED START button with indicator light button LOCK indicator light Button with ON/OFF indicator light: press this briefly to switch the machine on or off. The green indicator light indicates that the machine is switched on.
Running a wash cycle EN WARNING: before you use the washing machine for the first time, run a wash cycle with detergent and no laundry, using the 90° cottons cycle without pre-wash. To remove the delayed start option, press the button until the display shows the text OFF; the symbol will disappear. 1. SWITCH THE MACHINE ON. Press the button.
Wash cycles and options Bleach Fabric softener Max. load (kg) Cycle duration Wash Cotton Coloureds (2-3): lightly soiled whites and delicate colours.
Detergents and laundry EN Detergent The type and quantity of detergent required depend on the type of fabric you are washing (cotton, wool, silk, etc.), as well as its colour, the washing temperature, the level of soiling and the hardness of the water in the area. Measuring out the detergent carefully will avoid wastage and help to protect the environment: although they are biodegradable, detergents still contain ingredients which alter the balance of nature.
Precautions and tips ! The machine was designed and constructed in accordance with international safety regulations. The following information is provided for safety reasons and must therefore be read carefully. General safety • This appliance was designed for domestic use only.
Care and maintenance EN Cutting off the water and electricity supplies • Turn off the water tap after every wash cycle. This will limit wear on the hydraulic system in the machine and help to prevent leaks. • Unplug the appliance when cleaning it and during all maintenance work. Cleaning the machine The outer parts and rubber components of the appliance can be cleaned using a soft cloth soaked in lukewarm soapy water. Do not use solvents or abrasives.
Trouble shooting Your washing machine could occasionally fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be not solved easily using the following list. Problem: Possible causes / Solutions: The washing machine does not switch on. • The appliance is not plugged into the socket fully, or not enough to make contact. • There is no power in the house. The wash cycle does not start. • • • • The door is not closed properly.
Assistance EN Before calling for Assistance: • Check whether you can solve the problem by yourself (see “Trouble shooting”); • Restart the wash cycle to check whether the problem has been solved; • If it has not, contact the Authorised Technical Assistance Service. ! If the washing machine has been installed or used incorrectly, you will have to pay for the call-out service. ! Always request the assistance of authorised technicians.
Istruzioni per l’installazione e l’uso LAVABIANCHERIA Sommario I Installazione, 14-15 I Italiano Disimballo e livellamento Collegamenti idraulici ed elettrici Dati tecnici Descrizione della macchina, 16-17 Pannello comandi touch control Come effettuare un ciclo di lavaggio, 18 Programmi e opzioni, 19 Tabella Programmi Le opzioni di lavaggio Detersivi e biancheria, 20 AQUALTIS Detersivo Preparare la biancheria Consigli di lavaggio Sistema bilanciamento del carico AQS73D 29 Precauzioni e consigli,
Installazione I ! E’ importante conservare questo libretto per poterlo ! In caso sia posizionata su moquette o tappeti, regolare consultare in ogni momento. In caso di vendita, di cessione o di trasloco, assicurarsi che resti insieme alla lavabiancheria. i piedini in modo da conservare sotto la lavabiancheria lo spazio necessario per la ventilazione. ! Leggere attentamente le istruzioni: ci sono importanti informazioni sull’installazione, sull’uso e sulla sicurezza.
Collegamento del tubo di scarico 65 - 100 cm Collegare il tubo di scarico a una conduttura di scarico o a uno scarico a muro posti tra 65 e 100 cm da terra evitando assolutamente di piegarlo. ! Non usare prolunghe e multiple. I ! Il cavo non deve subire piegature o compressioni. ! Il cavo di alimentazione e la spina devono essere sostituiti solo da tecnici autorizzati. Attenzione! L’azienda declina ogni responsabilità qualora queste norme non vengano rispettate.
Descrizione della macchina I PANNELLO COMANDI TOUCH CONTROL PORTA OBLÒ MANIGLIA PORTA OBLÒ ZOCCOLO PIEDINI REGOLABILI PORTA OBLO’ Per aprire la porta oblò utilizzare sempre l’apposita maniglia (vedi figura). CASSETTO DEI DETERSIVI Si trova all’interno della macchina e vi si accede aprendo la porta. Per il dosaggio dei detersivi vedi il capitolo “Detersivi e biancheria”. A 3 1 210 180 150 120 90 60 B 16 2 1. vaschetta per il prelavaggio: usare detersivo in polvere.
Pannello comandi touch control Pulsante con spia Pulsante START/PAUSE CENTRIFUGA Manopola PROGRAMMI M2 Pulsante M1 TEMPERATURA I Icone FASI DI LAVAGGIO Spia ECO DISPLAY ON/OFF M3 Pulsanti OPZIONI Pulsante PARTENZA RITARDATA ON/OFF : premere brevemente il pulsante per accendere o spegnere la macchina. La spia verde indica che la macchina è accesa. Per spegnere la lavabiancheria durante il lavaggio è necessario tenere premuto il pulsante più a lungo, circa 3 sec.
Come effettuare un ciclo di lavaggio I NOTA: la prima volta che si utilizza la lavabiancheria, effettuare un ciclo di lavaggio senza biancheria ma con detersivo impostando il programma cotone 90° senza prelavaggio. 1. ACCENDERE LA MACCHINA. Premere il pulsante . Tutte le spie si accenderanno per 1 secondo e sul display comparirà la scritta AQUALTIS; rimarrà poi accesa fissa la spia del pulsante e la spia START/PAUSE lampeggerà. 2. SCEGLIERE IL PROGRAMMA.
Programmi e opzioni Durata ciclo Carico Max.
Detersivi e biancheria I Detersivo La scelta e la quantità del detersivo dipendono dal tipo di tessuto (cotone, lana, seta...), dal colore, dalla temperatura di lavaggio, dal grado di sporco e dalla durezza dell’acqua. Dosare bene il detersivo evita sprechi e protegge l’ambiente: pur biodegradabili, i detersivi contengono elementi che alterano l’equilibrio della natura. Si consiglia di: • usare detersivi in polvere per capi in cotone bianchi e per il prelavaggio.
Precauzioni e consigli ! La macchina è stata progettata e costruita in conformità alle norme internazionali di sicurezza. Queste avvertenze sono fornite per ragioni di sicurezza e devono essere lette attentamente. Sicurezza generale • Questo apparecchio è stato concepito esclusivamente per un uso di tipo domestico.
Manutenzione e cura I Escludere acqua e corrente elettrica • Chiudere il rubinetto dell’acqua dopo ogni lavaggio. Si limita così l’usura dell’impianto idraulico della macchina e si elimina il pericolo di perdite. • Staccare la spina della corrente quando si pulisce la macchina e durante i lavori di manutenzione. Per accedere alla precamera: 1 2 Pulire la macchina La parte esterna e le parti in gomma possono essere puliti con un panno imbevuto di acqua tiepida e sapone. Non usare solventi o abrasivi.
Anomalie e rimedi Può accadere che la macchina non funzioni. Prima di telefonare all’Assistenza (vedi “Assistenza”), controllare che non si tratti di un problema facilmente risolvibile aiutandosi con il seguente elenco. Anomalie: Possibili cause / Soluzione: La macchina non si accende. • La spina non è inserita nella presa della corrente, o non abbastanza da fare contatto. • In casa non c’è corrente. Il ciclo di lavaggio non inizia. • • • • La porta oblò non è ben chiusa.
Assistenza 195096939.02 12/2011 - Xerox Fabriano I Prima di contattare l’Assistenza: • Verificare se l’anomalia può essere risolta autonomamente (vedi “Anomalie e Rimedi); • Riavviare il programma per controllare se l’inconveniente è stato ovviato; • In caso negativo, contattare il Servizio Assistenza Tecnico Autorizzato. ! In caso di errata installazione o uso non corretto potrete essere chiamati al pagamento dell’intervento. ! Non ricorrere mai a tecnici non autorizzati.