Instruction for Use

25
7.
Unscrew the fixing screws securing the right and left hinges,
remove them and refit them on opposite sides (Fig. 7). Refit
the top panel, following the same steps as at points 6 and 5.
8.
Position the bushings and top covers from the right hand side
on the left (Fig. 8 and 9). Remove the bottom right bushing and
fit it on the left (Fig. 8 and 9).
9.
Refit the central hinge by rotating it 180°. Refit the 2 doors on
the central hinge, following the same steps as at point 2. Secure
the hinge with the 2 screws (Fig. 10).
Fig. 7
Fig. 8
Fig. 9
Fig. 10
63602000GB.fm Page 25 Monday, May 9, 2005 11:06 AM