Instruction for Use

ManualsBrandsWhirlpool ManualsDomestic AppliancesARC8017 IX

PRODUCT SHEET

Your new appliance is a combined ventilated, fridge-freezer

exclusively for domestic use. Whirlpool No Frost Fresh

Control fridge-freezers provide circulate chilled air around the

storage areas, holding the right humidity level in the fridge to

keep the long freshness of food products and prevent the

formation of ice, thereby completely eliminating the need for

defrosting. Frozen items don’t stick to the walls, labelling stays

legible and storage space remains neat and clear. No Frost

temperature and humidity controls helps to keep food fresher

for longer. In combination with , not only does it control

the sensor, but directs the cooling power exactly where it is

needed, optimising energy efficiency.

A. Refrigerator Compartment

1. Multi-flow cold air system

1a. Light bulbs

1b. Antibacterial filter grille, air intake area

1c. Light cover

1d. Multi-flow cold air vent

2. Shelves / Shelf area

3. Cooler compartment (temperature lower than in the

refrigerator compartment)

4. Rating plate

5. Crisper drawer

5a. Air control

6. Crisper divider

7. Separator (depending on the model)

8. Door trays

B. Freezer Compartment

9. Upper basket (freezing zone)

10.

Ice tray

11. Shelves (depending on the model)

12. Storage basket for frozen food items

13. Freezer compartment door trays (for pizza or other frozen

food with short storage time)

C. Control panel and LCD display

Note: The number and type of shelves and configuration of

accessories may vary, depending on the model. All shelves, door

trays and racks are removable.

Do not place food in a way that obstructs the air intake

area (1b) and the air flow outlets (1d).

Note: Refrigerator/freezer accessories are not suitable for

washing in a dishwasher.

The anti-bacterial filter ensures a higher level of hygiene in

your refrigerator through continuously purifying the circulating

air of bacteria. Remove it from the box found in the crisper

drawer (item 5) and insert into the grille (item 1b).

Replace the filter every 6 months.

1. Remove the filter and dispose it as a whole (grate box +

insert).

2. Replace the filter with the new ones.

3. The replacement procedure is attached to the filter.

Our After-sales Service can supply this type of filter.

CONTROL PANEL DESCRIPTION

Compartments ON/OFF, menu, selection and

confirmation buttons

1. Refrigerator compartment Fridge stand-by - ON/OFF button

2. Menu button

3. Appliance ON/OFF button

4. Selected compartment temperature increase button

5. Confirmation button

6. Selected compartment temperature decrease button.

Functions and settings symbols

1. Functions and settings for the refrigerator compartment

2. Appliance, alarm and malfunction symbols

3. Functions and settings for the freezer compartment.

Switching on the appliance: Press the “On-Off” button

Switching off the appliance: Press the “On-Off” button again

Adjusting the temperature: To change the temperature inside

the refrigerator or freezer compartment, press the Menu button

until the refrigerator or freezer temperature symbol turns on

(symbol flashes).

Then adjust the temperature by pressing the +/- buttons and

confirm by pressing “OK”.

Displaying the refrigerator and freezer compartment

temperatures.

The temperature inside the refrigerator compartment can be

adjusted between +2°C and + 8°C. In the same way, the freezer

compartment temperature can be adjusted between -16°C and

-24°C.

Summary of content (4 pages)

PAGE 1
PRODUCT SHEET Your new appliance is a combined ventilated, fridge-freezer exclusively for domestic use. Whirlpool No Frost Fresh Control fridge-freezers provide circulate chilled air around the storage areas, holding the right humidity level in the fridge to keep the long freshness of food products and prevent the formation of ice, thereby completely eliminating the need for defrosting. Frozen items don’t stick to the walls, labelling stays legible and storage space remains neat and clear.
PAGE 2
GB ELECTRICAL CONNECTION When the appliance is connected to the power supply, the display lights up and all the symbols appear on the display for a few seconds. The factory setting -18°C appears and flashes, the symbol lits, while the refrigerator display shows a temperature of +5°C (factory-set). While the appliance is working to reach the factory-set temperature, the alarm icon lits, an acoustic alarm sounds and temperature symbol (- -) on the freezer display flashes.
PAGE 3
GB Appliance, alarm and malfunction symbols “6th Sense” function The 6th Sense function is automatically activated when: • a large amount of food is loaded into the refrigerator and/or freezer, • the refrigerator and/or freezer door is left open for a long time, • a prolonged power failure takes place, causing the internal temperature of the appliance to increase to values that cannot guarantee safe storage of food.
PAGE 4
GB Function indicating the necessity to replace the Anti-bacterial filter The replacement of the filter is described on the first page of this Product Sheet. After connecting the appliance, the three-segment icon is displayed. The segments will sequentially go off: - after 2 months - after 4 months - after 6 months After 6 months of operation, the alarm icon and icon will be displayed, indicating that it is necessary to replace the filter.