Instruction for Use

ManualsBrandsWhirlpool ManualsDomestic AppliancesART 458/A+/1

Prior to replacing bulbs or LED lights, disconnect the refrigerator from the power supply, then follow the

respective instructions depending on the type of lighting the appliance is fitted with.

To replace the bulb, use the same type of bulbs that are available at the service centre or supplied by authorized

representatives.

1) type of lighting

1. Unscrew the bolts and take off the bulb cover.

2. The lamp is fitted with the pin type bulb, therefore, do not pull it

out or unscrew. Turn it in the direction indicated by the arrows.

3. After inserting a new bulb, set back the bulb cover and wait for

five minutes before connecting the appliance to the mains.

2) type of lighting

To remove the bulb, turn it counterclockwise, as indicated in the

Figure. Wait for 5 minutes before connecting the appliance to the

power supply.

3) type of lighting

If the appliance is fitted with LED lighting that needs replacement,

contact the service centre.

LED lighting serves longer than standard bulbs and

provides evener and more environment-friendly lighting.

Regularly clean the appliance using a cloth and warm water solution as well

as neutral cleaning detergents for cleaning the inside of the refrigerator. Do

not use abrasive detergents. Regularly clean the thaw water drain outlet

located on the rear wall (beside the fruit and vegetable shelf) using the

provided tool in order to drain the thaw water correctly (see the Figure).

Before carrying out maintenance or cleaning, disconnect the appliance from

the mains or discontinue power supply.

Connect the appliance to the mains.

In some models, an acoustic signal can be heard indicating that the temperature alarm is activated. To

deactivate the signal, press and hold the knob. If the appliance is fitted with the antibacterial un odour

eliminating filter, insert it into the fan, as indicated in the instructions.

Note: after switching on, the refrigerator needs approximately 4-5 hours to reach the temperature necessary for

storage of usual quantity of food.

FIRST TIME USE

APPLIANCE MAINTENANCE AND

CLEANING

BULB OR LED LIGHT REPLACEMENT

(Depending on the Model)

Summary of content (6 pages)

PAGE 1
FIRST TIME USE Connect the appliance to the mains. In some models, an acoustic signal can be heard indicating that the temperature alarm is activated. To deactivate the signal, press and hold the knob. If the appliance is fitted with the antibacterial un odour eliminating filter, insert it into the fan, as indicated in the instructions. Note: after switching on, the refrigerator needs approximately 4-5 hours to reach the temperature necessary for storage of usual quantity of food.
PAGE 2
WHEN THE APPLIANCE IS NOT USED Disconnect the appliance from the mains, empty, defrost (if necessary), and clean. Leave the doors ajar to allow the air circulation in the appliance. This prevents the formation of mould and unpleasant odours. IF THE POWER SUPPLY IS DISCONNECTED Do not open the doors, so that to ensure storage of food in cool conditions as long as possible. Do not refreeze partially thawed food.
PAGE 3
FREEZER COMPARTMENT Freezer compartment is suitable for storage of frozen food (during time period marked on the packing) and for freezing of fresh food. The quantity of fresh food that can be frozen within 24 hours is indicated on the data plate. Insert the food into the freezer compartment (see the Quick Guide) ensuring around packages enough space for air circulation. It is not advisable to refreeze partially thawed food.
PAGE 4
MEAT AND FISH COMPARTMENT (depending on the model) The meat and fish compartment is especially designed to keep the freshness and nutritional value of the products longer. Do not store fruits and vegetables in this compartment – the temperature might drop below 0°C and the water in the foodstuffs might freeze.
PAGE 5
ZERO DEGREE COMPARTMENT (depending on the model) Zero Degree compartment is especially designed for maintaining low temperature and appropriate level of moisture to keep products (e.g., meat, fish, fruits and winter vegetables) fresh longer. Activating and Deactivating the Compartment When the compartment is activated, its internal temperature is about 0°. To activate the compartment, press and hold the button shown in the image for more than 1 second until the symbol lights up.
PAGE 6
Removing the Zero Degree Compartment To make more space in the refrigerator, you can remove the Zero Degree compartment. Do the following: - For your convenience, we suggest to empty (and remove, if necessary) both lower door trays. - Turn off the compartment. - Pull out the drawer and the white plastic shelf under the compartment. Note: The top shelf and the side fastenings cannot be removed.