Instruction for Use

Before contacting the After-Sales Service:

Switch the appliance on again to see if the problem

has been solved. If it has not, unplug the appliance

and wait for about an hour before switching on

again.

If the appliance is still not working after you have

gone through all the checks listed in the

troubleshooting guide and switched it off then on

again, contact the After-Sales Service to explain the

problem and have the following information ready:

• the type of fault

• the model

• the type and serial number of the appliance

(given on the rating plate)

• the Service number (the number after the word

SERVICE on the rating plate inside the

appliance)

Note:

the door opening direction can be changed. If

this operation is performed by the After-Sales

Service it is not covered by the warranty.

AFTER-SALES SERVICE

Note: the upper shelf and the side supports cannot be removed.

To restore "Zero Degrees" box operation, make sure you replace the white plastic shelf underneath the

box before inserting the drawer and reactivating the function. To optimise energy consumption, we

recommend you deactivate the "Zero Degrees" box and remove it.

Clean the box and all its parts regularly, using a cloth and a solution of warm water and neutral detergent

specifically formulated for refrigerator interiors (take care not to immerse the white plastic shelf

underneath the box in water).

Before cleaning the box (including the outside), remove the drawer so as to disconnect the box

from the electricity supply.

Never use abrasive detergents.