Setup and user guide

ManualsBrandsWhirlpool ManualsDomestic AppliancesART 9811/A++ SF

Quick guide

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT

In order to receive a more complete assistance, please

Before using the appliance carefully read the Safety

Instruction.

PRODUCT DESCRIPTION

FIRST TIME USE

Wait at least two hours, after the installation, before connecting

the appliance to the power supply. Connect the appliance to the

power supply it starts the operation automatically. The ideal storage

temperatures for the food are preset in the factory.

After turning the appliance on, you must wait for 4-6 hours for the

correct storage temperature to be reached for a normally lled

appliance. Position the antibacterial anti-odour lter in the fan as

demonstrated in the lter packaging (if available). If the audible signal

sounds, it means that the temperature alarm has intervened: press the

button to switch o the acoustic alarms.

CONTROL PANEL

1. 2.

1. On/stand-by

2. Refrigerator temperature - Fast cool

SENSE FRESH CONTROL

The appliance is automatically able to quickly reach the optimal

internal preservation temperature. The function enables to control also

the humidity of the appliance. In order for it to function correctly, the

fan must also be turned on. It is possible to turn the function on/o

(see Fan description).

FAN*

The Fan improves temperature distribution inside the product,

allowing better preservation of stored food and reduction of excess

humidity. The fan is switched on by default and can be activate/

deactivate manually. The fan operating mode is adjusted based on

product condition. You can turn the fan on/o by pressing the

and “On/Stand-by”

buttons at the same time for 3 seconds. The

lit 6thSense FreshControl symbol indicates that the fan is on and

therefore the 6thSense FreshControl function is on. If the ambient

temperature exceeds 27°C, or if drops of water are present on the

glass shelves, it is essential that the fan is on to ensure the proper

preservation of the food. Deactivation of the fan allows energy

consumption to be optimised.

Note: the fan restarts automatically after a power cut or after turning o

the appliance. Do not obstruct the air intake area with food items.

ANTIBACTERIAL FILTER*

Remove it from the box placed in the Fruit and vegetable drawer and

insert into the cover of fan. The replacement procedure is included in

the lter box.

ON/STANDBY

Press the button for 3 seconds to turn the appliance o. In

Stand-by mode the light in the refrigerator compartment does not turn

on. Press the button again briey to reactivate the appliance.

Note: this does not disconnect the appliance from the power supply.

REFRIGERATOR COMPARTMENT TEMPERATURE

It is possible to set a dierent temperature with the

button.

There are ve possible controls.

• From a less cold temperature

(left)

• to a colder temperature

(right).

FAST COOL

Press the button

for 3 seconds to quickly cool the

refrigerator compartment or 6 hours before putting large quantities of

food to be frozen in the freezing zone. When the function is turned on

the icon

lights up.

The function automatically turns o after 30 hours, or manually by

pressing the button

again for 3 seconds.

Note: avoid a direct contact between the fresh food and the food that is

already frozen To optimise the freezing speed, drawers can be removed

and the food can be placed directly on the bottom of the compartment.

* Available only on certain models

Summary of content (4 pages)

PAGE 1
EN Quick guide THANK YOU FOR BUYING A WHIRLPOOL PRODUCT In order to receive a more complete assistance, please register your product on www‌.‌whirlpool‌.‌eu/‌register Before using the appliance carefully read the Safety Instruction. PRODUCT DESCRIPTION FIRST TIME USE Wait at least two hours, after the installation, before connecting the appliance to the power supply. Connect the appliance to the power supply it starts the operation automatically.
PAGE 2
“0° ZONE” COMPARTMENT* The “0° ZONE” compartment is specifically designed to maintain a low temperature and the correct humidity to preserve fresh food for longer (for example, meat, fish, fruits and winter vegetables). TURNING ON AND TURNING OFF THE COMPARTMENT The internal temperature of the compartment is approximately 0° when the compartment is turned on. To turn on the compartment, press the button (1) for more than one second until the symbol (2) lights up.
PAGE 3
4. Remove the frost on the accessory by rinsing it under running (not hot) water. 5. Let the accessory drip dry and dry the plastic parts with a soft cloth. 6. Reinsert the accessory by placing the back part on the projections shown in figure, then refasten the handle of the accessory to the clasps above. 7. Reinsert the upper drawer and close the door of the freezer compartment. It is possible to clean the STOP FROST accessory on its own without completely defrosting the freezer compartment.
PAGE 4
TROUBLESHOOTING What to do if... Possible reasons Solutions The control panel is switched off, the appliance does not work. The appliance may be in On‌/‌Stand‑by mode. There may be an appliance power supply problem. Turn the appliance on pressing the On/Stand-by button. Check that: • there is not a power outage; • the plug is properly inserted in the power socket and the mains double-pole switch (if present) is in the correct position (i.e.