Instruction for Use

Control panel
The front The back
Drying Guide
PROGRAMMES
Knob
TIMER
Knob
START
Button
Indicator
ACTIVE
Light
Control Panel
Drum
Model & Serial
numbers
Filter
The Drying Guide allows you to consult a user
friendly table of fabric types and load capacities.
The TIMER knob sets a delay on the dryer’s start time.
Rotate it clockwise until you reach the number of
hours you want to delay the start time: If you have
gone too far, turn the knob counter-clockwise (see
Start and Programmes).
The PROGRAMMES knob sets the programme: rotate
it clockwise, never counter-clockwise, until the
indicator is pointing to the programme you want to
select (see Start and Programmes).
Dryer Description
4
GB
The START button begins drying a selected
programme (see Start and Programmes).
The HEAT button selects drying temperature (see
Start and Programmes).
OUT: HIGH heat. IN: LOW heat.
The ALARM buzzer signals the end of a drying cycle.
OUT: Buzzer ON. IN: Buzzer OFF.
The ACTIVE indicator light signals that your dryer is in
use. This light will glow when the START button is
pressed. It will remain on until the door is opened or
the power is turned off. This light will be on during a
delayed start programme.
HEAT
Button
ALARM
Button
Air Intake Vent
Vent Tube fitted here
Caution: Hot!
Rating plate