Specifications

4-9
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING
REMOVING THE LID AND A HINGE
1. Unplug washer or disconnect power.
2. To remove the lid:
a) Raise the lid and remove the two hinge
pin screws from both sides.
3. To remove a hinge:
a) Remove the lid (see step 2).
b) Pull the hinge pin out of the hinge you
are removing.
c) Remove the top hex-head screw from
the hinge you are removing.
Top Hinge Screw
Pull Hinge Pin Out
d) Raise the cabinet top (see page 4-4 for
the procedure).
e) Remove the hex-head screw from the
hinge mounting bracket, and remove
the hinge from the cabinet top.
Hinge Bracket
Screw
b) Lift the lid, slide it off the hinge pins,
and remove the lid from the washer.
Lid Hinge
Pin Screws
LIFT
Washer Lid
Hinge Pin
Lid Hinge