Quick Start Guide

AWG 338 PROGRAMME CHART IRUK AWG 338 PROGRAMME CHART IRUK
USE OF MACHINE AS A DRYER
USE OF THE RYER
The machine is endowed with a special water system that can condense the steam created during the drying cycle and evacuate it through the normal
discharge.
NOTE: During the drying cycle the water tap must stay open and the outlet hose must be correctly positioned ( see the installation instructions).
MAX LOAD FOR DRYING CYCLE
In order to obtain the best drying results do not exceed the following laundry loads:
- resistant fabrics Kg 2.5 (Kg 2 for heavy bulky laundry)
- mixed and synthetic fibres: Kg 1,5
The above recommended loads allow a free moving of the laundry and avoid an excessive creasing so to guarantee a uniform drying result.
DRYING TIMES
The following drying times change according to the spin cycle the laundry has gone through and the features of the fabrics. The user will learn the best drying times by
experience.
LOAD LAUNDRY READY TO IRON LAUNDRY READY TO USE
COTTON: 2,5 kg 100 min. 120 min.
1,5 Kg 50 min. 70 min.
SYNTHETIC FIBRES: 1,5 Kg “ 50 min.
0,5 Kg “ 30 min.
ATTENTION: Do not use the dryer for cloths treated with solvents or oil by-products since the volatile substances could cause an explosion.
NOTE: Be very careful not to dry the laundry too much. It is recommended to leave it a bit damp. An excessive drying could crease the laundry making the ironing difficult.
Do not use the dryer for sleeping-bags, eiderdowns, pillows and bulky blankets. These items expand while drying hindering a proper air flow inside the machine.
Normally possible laundry fraying is evacuated through the outlet hose. Should you have used the machine only as a dryer or washed and dried a particular cloth, we
strongly recommend to take out the laundry and start a rinse and spin programme so to empty the drum from possible fraying preventing it from heaping up during the
next cycle.
NOTE: The dryer gets hot while running.
- Do not let children touch the door glass while the machine is running.
- Be very careful not to touch the door glass while taking out the laundry because it can burn.
- Be very careful with zippers, metal buttons and the like because they can burn while taking out the laundry.
DRYING CYCLE PROGRAMME SELECTION
It is possible to select the drying function only when the machine is on position ( STOP on the programme selector ).
1) Load the machine and shut the door keeping in mind the “Notes” about the max laundry load for drying cycle
2) The machine can operate two drying cycles with different temperatures, a high temperature for cotton, selectable at the off position after programme (5).
A low temperature for synthetic fibres, selectable at the off position after programme (10).
3) Open the water tap an keep it open during the programme cycle. Make sure that the outlet hose is in the correct position (in case of a doubt see the
installation instructions) and that the machine is electrically connected.
4) Push the half load button for washing and drying.
5) Select the required drying time by the drying programme selector. (Dryng Time)
6) Push the ON/OFF button to set the machine in operation.
WASHING/DRYING CYCLE SELECTION
1) Load the machine and shut the door keeping in mind the “Notes" about the max laundry load for drying cycle
2) The machine can operate two drying cycles with different temperatures, a high temperature for cotton, selectable at the off position after programme (5).
A low temperature for synthetic fibres, selectable at the off position after programme (10).
3) Open the water tap an keep it open during the programme cycle. Make sure that the outlet hose is in the correct position (in case of a doubt see the
installation instructions) and that the machine is electrically connected.
4) Push the half load button for washing and drying.
5) Select the required drying time by the drying programme selector. (Dryng Time)
6) Select the required washing programme by wash programme selector.
7) Push the ON/OFF button to set the machine in operation.
STAMPA T.L.F. 11/11/99 SM432 460604280
1
2
1
2
USE OF MACHINE AS A DRYER
USE OF THE RYER
The machine is endowed with a special water system that can condense the steam created during the drying cycle and evacuate it through the normal
discharge.
NOTE: During the drying cycle the water tap must stay open and the outlet hose must be correctly positioned ( see the installation instructions).
MAX LOAD FOR DRYING CYCLE
In order to obtain the best drying results do not exceed the following laundry loads:
- resistant fabrics Kg 2.5 (Kg 2 for heavy bulky laundry)
- mixed and synthetic fibres: Kg 1,5
The above recommended loads allow a free moving of the laundry and avoid an excessive creasing so to guarantee a uniform drying result.
DRYING TIMES
The following drying times change according to the spin cycle the laundry has gone through and the features of the fabrics. The user will learn the best drying times by
experience.
LOAD LAUNDRY READY TO IRON LAUNDRY READY TO USE
COTTON: 2,5 kg 100 min. 120 min.
1,5 Kg 50 min. 70 min.
SYNTHETIC FIBRES: 1,5 Kg “ 50 min.
0,5 Kg “ 30 min.
ATTENTION: Do not use the dryer for cloths treated with solvents or oil by-products since the volatile substances could cause an explosion.
NOTE: Be very careful not to dry the laundry too much. It is recommended to leave it a bit damp. An excessive drying could crease the laundry making the ironing difficult.
Do not use the dryer for sleeping-bags, eiderdowns, pillows and bulky blankets. These items expand while drying hindering a proper air flow inside the machine.
Normally possible laundry fraying is evacuated through the outlet hose. Should you have used the machine only as a dryer or washed and dried a particular cloth, we
strongly recommend to take out the laundry and start a rinse and spin programme so to empty the drum from possible fraying preventing it from heaping up during the
next cycle.
NOTE: The dryer gets hot while running.
- Do not let children touch the door glass while the machine is running.
- Be very careful not to touch the door glass while taking out the laundry because it can burn.
- Be very careful with zippers, metal buttons and the like because they can burn while taking out the laundry.
DRYING CYCLE PROGRAMME SELECTION
It is possible to select the drying function only when the machine is on position ( STOP on the programme selector ).
1) Load the machine and shut the door keeping in mind the “Notes” about the max laundry load for drying cycle
2) The machine can operate two drying cycles with different temperatures, a high temperature for cotton, selectable at the off position after programme (5).
A low temperature for synthetic fibres, selectable at the off position after programme (10).
3) Open the water tap an keep it open during the programme cycle. Make sure that the outlet hose is in the correct position (in case of a doubt see the
installation instructions) and that the machine is electrically connected.
4) Push the half load button for washing and drying.
5) Select the required drying time by the drying programme selector. (Dryng Time)
6) Push the ON/OFF button to set the machine in operation.
WASHING/DRYING CYCLE SELECTION
1) Load the machine and shut the door keeping in mind the “Notes" about the max laundry load for drying cycle
2) The machine can operate two drying cycles with different temperatures, a high temperature for cotton, selectable at the off position after programme (5).
A low temperature for synthetic fibres, selectable at the off position after programme (10).
3) Open the water tap an keep it open during the programme cycle. Make sure that the outlet hose is in the correct position (in case of a doubt see the
installation instructions) and that the machine is electrically connected.
4) Push the half load button for washing and drying.
5) Select the required drying time by the drying programme selector. (Dryng Time)
6) Select the required washing programme by wash programme selector.
7) Push the ON/OFF button to set the machine in operation.
STAMPA T.L.F. 11/11/99 SM432 460604280
1
2
1
2