Instruction for Use

45
GB
PRIOR TO THE FIRST USE OF THE WASHING MACHINE
Before connecting the washing machine read this manual carefully.
1. Removal of the transport bracket
The washing unit is firmly connected with the cabinet during the transport. Prior to switching the washing
machine on, it is necessary to remove the packaging and all polystyrene plinths as well as the transport
bracket from the back of the washing machine (see the chapter How to remove the transport bracket).
There is a danger of serious damages to the washing machine if is used without removing the transport
bracket.
2. First washing cycle
Before washing clothes for the first time, it is recommended to run one cycle without laundry to clean the
inside of the drum from dust and dirt.
1. Select a 60°C colour programme
2. Fill the detergent dispenser II with a small amount of detergent.
3. Start the washing machine (see the programme chart)
1. Lid
2. Inner door
3. Detergent dispenser
4. Drum flaps
5. Drain pump cover
6. Trolley (depending on the model)
7. Plinth
THE WASHING MACHINE
1
2
4
3
6
7
5

Summary of content (11 pages)