Instruction for Use

77
FILLING THE DETERGENT AND
ADDITIVES
1.
Pull out the detergent drawer. The drawer will
have three or four chambers depending on
the model.
2.
Filling the detergent
•
Programmes with pre-
and main wash.
•
Main wash programme
without prewash.
When using liquid detergent,
extract the coloured insert from
the drawer and put it in the
compartment .
The insert has a scale to make
dosing easier.
•
Add fabric softeners and conditioners
- no further than the “Max” mark
(three chamber models) or the
“100 ml” mark (four chamber models).
•
Fill chlorine bleach only to the
“Max” mark (if model is suited
to its use).
•
Stain remover.
•
Water softener
(water hardness class 4).
•
Starch (diluted in water).
In this case select the
programme “Rinse and Spin”.
After pouring the starch fill about
1 litre of water into chamber.
3.
Slide the drawer in until it clicks shut.
Notes:
•
When using highly concentrated detergents,
use the detergent ball provided with the
detergent and place it directly in the drum to
avoid dispensing problems (for programmes
without pre-wash only).
•
For programmes with prewash: liquid
detergents can be used for the prewash.
For the main wash then a powder detergent
has to be used.
•
Dose the correct amount of concentrated
fabric softener and dilute with water up to the
maximum level marked in the softener
compartment.
Dyeing: Commercially available products usually
consist of a dye colour, fixing agent and salt.
Pour the dye colour, fixing agent and salt directly
into the empty drum, and only then load the
laundry.
•
Only use products designed for use in
washing machines.
•
Follow the manufacturer's instructions.
•
Plastic and rubber components of the
machine can be stained by dyes or bleaches.
DETERGENT AND ADDITIVES
Detergent drawer with 3 chambers
Detergent drawer with 4 chambers
DYEING AND BLEACHING