Instruction for Use

82
Connect the water drain hose
The draining varies according to model:
External drain hose
1a.
Unhook the drain hose from the left clip.
Attention
:
do not unhook
the right drain hose connection.
Internal drain hose
1b.
Pull the hose completely out of the holder.
Close off the hole with the attached cap.
2.
Connect the drain hose to the siphon or hook it over the edge of a sink
by means of the U bend supplied.
3.
Make sure there are no kinks in the hose.
4.
Secure the hose so that it cannot fall down while the appliance is
running.
The drain hose should not be hooked onto small washbasins.
If you need to add an extension, use a flexible hose of the same type and
secure the union with screw-on hose clips.
Max. drain hose length: 2.50 m
Max. drain height: 1.25 m
Min. drain height: 0.70 m
1a
1b