Operation Manual

CARE AND MAINTENANCE

Appliance exterior and control panel

• Can be washed down with a soft, damp cloth

• A little neutral detergent (non abrasive) can also

be used.

• Dry with a soft cloth

Door seal

• Clean with a damp cloth when necessary

• Check the condition of the door seal periodically

Filter

• Check and clean the filter regularly, at least two

or three times a year (see “Removing the filter”).

Detergent dispenser

1. Press the release lever in the prewash compartment downward

and remove the drawer.

2. Remove the coloured grid (fig. “A”) from the fabric softener

compartment.

Remove the insert from the fabric softener compartment.

3. Wash all the parts under running water.

4. Refit the insert and the grid in the detergent drawer and fit the

drawer back inside its housing.

Mesh filter for water connection

Check and clean regularly.

For washing machines with a straight inlet hose

1. Close the tap and loosen the inlet hose on the tap.

2. Clean the internal mesh filter and screw the water inlet hose back

onto the tap.

3. Now unscrew the inlet hose on the rear of the washing machine.

4. Pull off the mesh filter from the washing machine connection

with universal pliers and clean it.

5. Refit the mesh filter and screw the inlet hose on again.

6. Turn on the tap and ensure that the connections are completely

water-tight.

For machines with Water Stop hose

1. Turn off the tap and unscrew the Water Stop hose from the tap.

2. Clean the internal mesh filter and screw the water inlet hose back

onto the tap.

3. Turn on the tap and make sure the connections are completely

water-tight.

30105536aGB.fm Page 24 Thursday, December 30, 2004 10:53 AM

Black process 45.0° 100.0 LPI