Operation Manual

28
INSTALLATION
Removal of transport bracket
The appliance is fitted with a transport bracket to avoid any
possible damage during transport.
Before using the appliance, the transport bracket at the
back MUST be removed.
1.
Unscrew the two screws
A
and the four screws
B
with a
flat screwdriver or a No. 8 hex nut box spanner.
2.
Remove the transport bracket.
3.
Replace the four outer screws
B
on the machine and
tighten them.
4.
Remove the two seals
C
from the hose holder and clip
them into the openings of the machine
D
.
Note: do not forget screw back and tighten the four outer
screws B.
2
1
1
4
C
A
B
D
1
4
D
3gb10073.fm5 Page 28 Thursday, May 16, 2002 4:30 PM