Instruction for Use

37
• Packing
The packing material is 100% recyclable as
indicated by the recycling symbol.
• Appliance
The appliance is built from recyclable
materials. If you decide to scrap the
appliance ensure you observe local waste
disposal by-laws.
Before scrapping, cut off the plug and the
power cable so the appliance cannot be
connected to the mains.
• Environmental tips
- If possible, always wash with a full load
(depending on the programme) to save water
and energy.
- For lightly to averagely soiled laundry, use a
programme without a prewash cycle.
- Use low temperatures or short programmes
for lightly soiled laundry.
- Use a saving option (see programme chart)
for small and lightly soiled loads and reduce
the amount of detergent.
- If you intend to dry the washing in a dryer,
select maximum spin speed (according to the
type of laundry) to reduce the energy
consumption of the dryer.
- Do not exceed the detergent measures
indicated in the manufacturer’s instructions.
- Use stain removal products only when strictly
necessary.
• The appliance conforms to European safety
regulations and to Directive n. 93/68/EC.
• Use the appliance only for domestic washing
and for its intended applications.
• Ensure the installation and the electrical and
water connections have been carried out in
accordance with the manufacturer’s
instructions and in observance of local safety
regulations (refer to “Installation
instructions”).
• Unplug the appliance before cleaning or
maintaining the appliance.
• When the appliance is not in use switch it off
and turn off the tap(s).
• Do not attempt to force the lid open.
• Do not allow children to play with the
appliance or enter the drum.
• Packing materials can be dangerous for
children: keep all packing materials (plastic
bags, polystyrene, etc.) well out of their
reach.
1. Unplug the appliance.
2. Turn off the tap(s).
3. Remove the water supply and drain hose.
4. Eliminate all water from the hoses and from
the appliance (see “Draining Residual
Water”).
Be careful that the water is sufficiently cooled
so as to avoid any accidents.
5. Replace the transport bracket.
6. Transport the washing machine upright.
PROTECTING THE ENVIRONMENT
SAFETY INSTRUCTIONS
TRANSPORT / HANDLING