CONTENTS BEFORE USING THE DRYER/CONNECTIONS PRECAUTIONS AND GENERAL RECOMMENDATIONS DESCRIPTION OF THE DRYER VENT CONNECTION DOOR REVERSIBILITY 7
BEFORE USING THE DRYER/CONNECTIONS 1. Removing the packaging and check • After unpacking, make sure that the dryer is undamaged. If in doubt, do not use the dryer. Contact After-Sales Service or your local retailer. • Keep the packaging materials (plastic bags, polystyrene parts, etc.) out of reach of children, as they are potentially dangerous. 2.
PRECAUTIONS AND GENERAL RECOMMENDATIONS 1. Packing The packing box may be fully recycled as confirmed by the recycling symbol. 2. Energy saving tips • Always dry a full load: depending on the type of laundry and the programme/drying time. • Always use the maximum allowed spin speed of your washing machine. You will save time and energy when running your drying cycle. • Do not overdry the laundry. • Clean the lint filter after every drying cycle.
DESCRIPTION OF THE DRYER 1. Work top 2. Contact pin 3. Door To open the door: pull the handle To close the door: push gently until closed. 4. Filter 1 2 4 VENT CONNECTION On delivery from the factory, the outlet vent hose, together with an adaptor, is located in the drum. Note: If the vent hose is not supplied, the AMH 577 kit, available from your dealer, should be used. Installing the vent hose 1. Place a towel or the packing material on the right-hand side next to the dryer. 2.
DOOR REVERSIBILITY Door Reversibility 3 1. Unplug the dryer. 2. Open the door. 3. Using a spanner, turn the contact pin on the inside of the door (top) through 90° and remove it. 4. Remove the 2 door hinge screws, followed by the door. 5. Unscrew the 2 screws above and below the door lock system. 6. Removing the door lock: Using a screwdriver, press down on the small rib in the upper opening and extract the door lock by pulling it towards you. 7.
