Operation Manual

8
DRAINAGE SYSTEM
For water container top only
To avoid having to empty the
water container at the end of
each cycle, the condensation
water can be drained away.
Note: normally the drain hose
is not supplied; the accessory
kit, available at your dealer or
our After-Sales Service should
be used.
Please contact your dealer or our
After-Sales Service to get the
reference of this accessory, which
should be used.
The connection for direct
draining is at the rear of the
dryer.
A.
Place an absorbent cloth
underneath to collect water
spillage.
B.
Remove the hose located at the
lower rear part of the dryer and
insert it in the nearby hole.
C.
Fix the hose (length: 1.5 m) to the
outlet connection. The height
difference between the two
drainage connections should not
exceed 1 m.
Notice:
To avoid siphoning, the end
of the hose must not be
immersed in the drain water.
Avoid bending and twisting
the hose.
C
1m
B