Quick Start Guide

5019 307 00043
Options
Indicative
Drying Time
Max
Load
Programmes
Gentle
Reduces Drying
Intensity
(recommended
for delicate
items)
Rapid
Shortens drying
duration
(recommended for
small items)
Buzzer
Signals/
Sounds end of
drying cycle
at Intervals
Anti-Crease
Prevents
laundry
from
creasing
Start Delay
Delays the
drying
cycle start
Spin speed
Washing Machine
rpm
800
rpm
1000
rpm
1200
Kg
Cotton
Max 5 kg
Extra dry
max 3.5 kg
95
135
-
80
110
3.5
5.0
Cupboard dry plus
max 3.5 kg
85
125
-
70
100
3.5
5.0
Cupboard dry*
max 3.5 kg
80
110
-
60
90
3.5
5.0
Iron dry*
max 3.5 kg
60
90
-
50
70
3.5
5.0
Easy care
Max 2.5 kg
Cupboard dry plus
-
30
55
25
45
-
1.0
2.5
Cupboard dry*
-
25
45
20
35
-
1.0
2.5
Iron dry
-
20
35
15
25
-
1.0
2.5
Airing
Laundry is aired for 30
minutes without heating
-- ----
Time
Programmes
Completes drying or dries
single items (suitable for
all fabrics).
-- ----
AWZ QUALITY
GB
QUICK REFERENCE
GUIDE
Please also carefully read the
Instructions for Use and
Installation Manual.
Start Pause
Starts the drying cycle. The
indicator lamp lights up when the
dryer is on.
Start delay
Delays the drying cycle start from
1 to 9 hours.
To select the start delay:
turn the programme selector knob
to the desired programme and press
the start delay button: with each
touch of the button, drying cycle
start is delayed by 1 hour. Press the
Start/Pause button.
To cancel or to change the
previously set time delay: turn the
programme selector knob to 0 or
open the door. To select the time,
press the Start Delay button. Press
the Start/Pause button to restart
the cycle. The remaining time
indication until start of drying cycle
will be reduced in 1h steps.
The pump may be heard working for
a short time.
Count-
Down
Shows the time remaining until
drying cycle start.
During the count-down the drum
will turn from time to time to re-
distribute the laundry
Anti-
Crease
Protection
Re-distributes laundry in
the drum.
When the Anti-Crease option is
selected and laundry has not been
taken out, an anti-crease cycle is
activated for 12 hrs. If the option is
selected with Start Delay, the
cycle operates both before and after
the drying cycle.
Filter
The indicator lamp lights up when the
filter needs cleaning.
Clean the filter
at the end of every cycle.
Water
Container
Lights up when water container
needs to be emptied. The drying
cycle is automatically interrupted.
Empty the water container.
Press
the Start/Pause button to restart
the dryer and to continue the
programme.
PROGRAMME SEQUENCE INDICATORS
Drying
Airing
End
Anti-
crease
The programme sequence
indicator lamps show the status
or the progress of the drying
cycle.
Gentle
and
Rapid
cannot be selected together.
Buzzer
and
Anti-crease
cannot be selected together.
* Test programmes according IEC 61121