Quick Start Guide

GB
Quick Reference Guide
Before using the machine, please also read the Instructions For Use carefully!
5
AZB 7570
5019 307 01349
(Subject to technical modifications)
Indicator lamps
Programme selector knob
The drying programme is selected by
turning this knob. The
“Start (Pause)”
indicator lamp flashes.
“Start (Pause)” button
The drying programme is started by
pressing this button. The indicator lamp
lights up.
Filter
The indicator lamp lights up when the
filter and/or the heat exchanger and its
housing need to be cleaned.
Clean the filter at the end of every
drying cycle.
Water container
The indicator lamp lights up when the
water container needs to be emptied.
The drying cycle is automatically
interrupted. Empty the container and
restart the drying programme.
Empty the water container after
every drying cycle
.
End
The drying programme is finished. Please
unload the dryer.
Overdry protection / 6
th
Sense
The indicator lights up when a humidity
controlled programme is selected, to
indicate the activated protection function.
Gentle
Selecting this option will reduce the
drying temperature. This option cannot
be selected when the “Rapid” option is
selected (if available).
Buzzer
When this option is pressed, a buzzer will
indicate the end of the drying cycle. This
option deactivates the “Anti-crease”
function, if it is activated.
Start delay
Delays the start of the drying cycle by 3, 6
or 9 hours. Each time the button is
pressed the delay is increased by 3 hours.
Press the
“Start (Pause)”
button to
confirm the final selection and to start the
dryer. The LEDs above the programme
selector knob flash to indicate the
selected time. During the countdown, the
drum will turn from time to time to
redistribute the laundry and the pump will
start to pump water in the water
container. To cancel or change the
previously set time delay, set the index of
the programme selector knob to the
“Off” position, or open the door.