Use and care guide
26
AUTOMATIC SETUP
INSTRUCTION (rst
time use) WPS
method
This procedure is
appliacable only if your
router supports WPS2.0
(or greather)
1. On your Smart Appliance:
• press the MENU button select : “7.
LIVE”, accept it by button ,
• press MENU button to select
“1.Setup feature” , and conrm
it the button to activate .This
activate provisioning process.
The appliance is being set to a
“search” mode for a local network.
On the text display you will see
messages : „Connect router” by
2 seconds then the message
“Activate WPS ”, along with a
counter to show a timeout of 2:30
countdown.
• The Connection State indicator
starts fast blinking .
2. Turn On your wireless router
press the WPS button
to make
a connections between two
products within 2:30minutes.An
indicator light on your router will
begin blinking.
3. When the appliance will
successfully connect to the local
router, you will see on the text
display “Router connected “ for 2
second , and then move to next
stage searching for backend . The
Connection State indicator
starts blink slowly, means
connection to the router is OK.
4. The appliance try to connect to
Backend system. On text display
you will see “Use App to register
refrigerator” by 5 second (only
one time) & Connection State
indicator becomes steady.
If your appliance doesn’t connect
If the fridge fails to nd the
connections to home network using
WPS ,the Wi-Fi indicator will return to
OFF state. On text display will show
“Could not connect “ for 5 second and
appliance will go to
“Micro Access Point mode “showing
on text display “Micro AP mode ON”
by 2 second. It will be activated and
will look for a signal for 20 minutes.
This will not be indicated on the
appliance interface.
The refrigerator exit provisioning
process.
If this happens, use the MANUAL
SETUP INSTRUCTION.
NOTE:
If an invalid feedback is received from
the router/ backend or connection
timeout happens the appliance show
on User Interface latest selected
temperatures of both cavity. No
information will be presented on text
display .
During Micro AP mode is allowed to
entering the MENU and repeat WPS
process.