Use and care guide

EN
17
REMOVING THE ACTIVE 0
COMPARTMENT
The Active 0 compartment can be
removed to create more space inside
the refrigerator. In this case proceed as
follows:
- switch o the compartment
- pull out the drawer
- pull out the glass shelf below Active 0
- remove the white plastic insulation
form the glass shelf
- put back the glass shelf.
Note: the upper shelf and the side
supports cannot be removed.
To restore Active 0 compartment box
operation, make sure you .replace the
white plastic shelf underneath the
box (with the glass shelf assembled
into the plastic) before
inserting the drawer
and reactivating the
function. The Active 0
compartment satisfies
the requirements of
a chill compartment
according to EN 62552.
Clean the compartment and all its parts
regularly, using a cloth and a solution
of warm water and neutral detergent
specifically formulated for refrigerator
interiors (take care not to immerse
the white plastic shelf underneath the
compartment in water).
Before cleaning the box (including
the outside), remove the drawer so
as to disconnect the box from the
electricity supply.
Never use abrasive detergents.