Use and care guide

19
EN
Attention:
• Incompatibility with the
“Vacation” function
To guarantee optimal performance,
the “Vacation” and “Active 0”
functions cannot be used at the same
time.
Therefore, if the “Vacation” function
has been already engaged, it has to be
disengaged rst to activate the “Active
0” function (and viceversa).
REMOVING THE ACTIVE 0
COMPARTMENT
The Active 0 compartment can be
removed to create more space inside
the refrigerator. In this
case proceed as follows:
- switch o the
compartment
- pull out the drawer
- pull out the glass shelf
below Active 0
- remove the white plastic insulation
form the glass shelf
- put back the glass shelf.
Note: the upper shelf and the side
supports cannot be removed.
To restore Active 0 compartment box
operation, make sure you .replace the
white plastic shelf underneath the box
(with the glass shelf assembled into
the plastic) before inserting the
drawer and reactivating the function.
The Active 0 compartment satises
the requirements of a chill
compartment according to EN 62552.
Clean the compartment and all its
parts regularly, using a cloth and a
solution of warm water and neutral
detergent specically formulated for
refrigerator interiors (take care not to
immerse the white plastic shelf
underneath the compartment in
water).
Before cleaning the box (including
the outside), remove the drawer so
as to disconnect the box from the
electricity supply.
Never use abrasive detergents.