Setup and user guide

EN
3
KEY LOCK
To lock/unlock the keys of the Control Panel, press the Key
Lock button for 3 seconds: the Key Lock indicator will light up
and an acoustical signal will be played.
FREEZE
CONTROL
Freeze Control is an advanced technology that reduces
temperature uctuations in the whole freezer compartment
to minimum, thanks to an innovative air system, totally
independent from the fridge. Freeze burns are reduced up to
60% and food preserves its original quality and color.
To activate/deactivate the Freeze Control function simply
press the FREEZE CONTROL button.
The function works properly in a defined range of
temperature: between -22°C and -24°C. When the function is
engaged and the current temperature in the freezer is
set to the warmer set point than -22°C, the temperature is
automatically set to -22°C to match the working range.
If the function is engaged and the user modify the freezer
temperature out of the working range, the function is
automatically switched off.
In case of Fast freezing is engaged, the function “Freeze
control” is inhibited until the Fast Freezing function switched
off.
6
TH
SENSE FRESH CONTROL
This function automatically works to ensure the optimal
conditions to preserve the stored food. If there are any
variations, 6
th
Sense Fresh Control immediately restores the
ideal conditions. Results are outstanding: freshness preserved
at best throughout the fridge cavity up to 4 times longer.
FAST COOL
Using Fast Cool function it is possible to increase the cooling
in the refrigerator compartment. The use of this function is
recommended when placing a very high quantity of food
in the refrigerator compartment. Press the Fast Cool button
to activate Fast Cool function. When activated, the Fast Cool
indicator will turn on. The function is automatically disabled
after 6 hours, or can be manually disabled by pressing Fast
Cool button.
FAST FREEZE
The use of this function is recommended when placing a very
high quantity of food to be frozen in the freezer compartment.
24 hours before freezing fresh food, press the Freezer button
to activate the Fast Freeze function. When activated, the Fast
Freeze indicator turns on. After 24 hours place the food to be
frozen in the middle freezing zone of freezer compartment.
The function is automatically disabled after 48 hours, or can
be manually disabled by pressing Fast Freeze button.
ACTIVE 0 COMPARTMENT
The Active 0 compartment is specically designed to
maintain a low temperature and a suitable humidity level, in
order to keep foods fresher for longer (e.g. meat, sh). When
deactivated, the drawer can be used for winter fruit and
vegetables.
Activating and deactivating the compartment
To activate/deactivate the Active 0 compartment, press the
dedicated button on the control panel ( indicator in the gure
below).
Active 0 compartment o: button partially lighted
Active 0 compartment on: button fully lighted
REFRIGERATOR LIGHT
The light system inside the refrigerator compartment uses
LEDs light, allowing a better lightning as well as a very low
energy consumption.
If the LED light system does not work, please contact the
Service to replace it.
Important: The refrigerator compartment light switches on
when the refrigerator door is opened. If the door is kept
open for more then 10 minutes the light will be automatically
switched o.
FAN + ANTIBACTERIAL FILTER
The Fan improves temperature distribution inside the
refrigerator compartment, allowing better preservation of
stored food.
If the appliance has the Fan it can be equipped with the
antibacterial lter.
Remove it from the box placed in the crisper drawer and
insert into the fan cover.
The replacement procedure is included in the lter box.
ALARM TYPE Signal Cause Cure
Door open alarm Door open alarm indicator
remains on, the acoustical
alarm is activated and the
Alarm Indicator blinks.
The Fridge or Freezer door has
remained open for more than
2 minutes.
Close the door or press the Stop Alarm
to mute the acoustical alarm.
Temperature
alarm
The Temperature display blinks
(°C) and the Alarm Indicator
remains on.
Inside the Freezer the
temperature is not adequate.
Press the Stop Alarm button; the
acoustical alarm stops, the Temperature
Display (°C) blinks and the Alarm
Indicator remains on until a temperature
< -10°C is reached.
Antibacterial lter
alarm
The Antibacterial lter alarm
indicator lit on.
Finished the validity of
Antibacterial lter.
Replace the Antibacterial lter, press the
Alarm button to reset it.
Long black-out
alarm
The Black Out Alarm icon
remains on, the Alarm
indicator blinks.
Prolonged power failure,
able to cause the inside
temperature to increase to 0°C.
Press the Stop Alarm button; the
acoustical alarm stops.
Malfunction The letter “F” blinks on the
display (°C).
Product malfunction. Contact the After-sales Service.
ALARM TABLE