Installation Instruction

10
INSTALLING COIN SLIDE AND
COIN BOX
The coin slide mechanism, service door lock and key, and coin
box lock and key are not included with some models, but can
be obtained from the usual industry sources.
Remove the service door of the meter case by lifting it up
at the back. Install the money-accepting device. (Refer to
manufacturer’s instructions for proper installation.)
A ground connection is needed for the coin slide, which can be
made by connecting the available harness (W10846503) to the
coin slide.
For washer using coin slides, use the adapter kit supplied with
the washer.
Install a lock and cam on the meter case service door. Install the
coin vault with lock and key in the meter case opening.
Ground
connection
COMPLETE INSTALLATION
n Check electrical requirements. Be sure that you have the
correct electrical supply and the recommended grounding
method.
n Check that all parts are now installed. If there is an extra part,
go back through steps to see what was skipped.
n Check that you have all of your tools.
n Check that shipping materials were completely removed from
washer.
n Dispose of/recycle all packaging materials.
n Check that the water faucets are on.
n Check for leaks around faucets and inlet hoses.
n Remove lm from console and any tape remaining on washer.
n Plug into a grounded outlet or connect power.
n Check that circuit breaker is not tripped or fuse is not blown.
n Start washer using the payment system (if available) to check
that the wash cycle completes without an error code or water
leak.
TYPICAL FULL LOAD SIZES
Load Type Loading
Suggestion
Load Type Loading
Suggestion
Mixed Load 3 double sheets
4 pillowcases
6 pairs shorts
8 T-shirts
2 shirts
2 blouses
8 handkerchiefs
Heavy Work
Clothes
3 pairs pants
3 shirts
1 coverall
4 pairs jeans
1 overall
Permanent
Press
2 double or
1 king size sheet
1 tablecloth
1 dress
1 blouse
2 slacks
3 shirts
2 pillowcases
Knits 3 blouses
4 slacks
6 shirts
4 tops
4 dresses
WASHER MAINTENANCE
Operating Tips