Installation Instruction

5
Tools Needed:
8" (203 mm) or 10" (254 mm) 8" (203 mm) or 10" (254 mm) Flat-Blade Screwdriver Phillips Screwdriver
Pipe Wrench Adjustable Wrench
that opens to 1" (25 mm)
TORX
®†
T20 Security 1" (25 mm) Hex-Head 5⁄16" (8 mm) Socket Wrench Pliers (that open to
Screwdriver or Bit Socket Wrench 1
9
/
16
" [39 mm])
Level Utility Knife 1/4" (6 mm) Nut Driver 27" (686 mm) Wood Block
Caulk Gun and Caulk Vent Clamps Pipe-Joint Compound Putty Knife
(for installing new exhaust vent) Suitable for Gas Type
Flashlight (optional) 1" (25 mm) Open-End Wrenches Ruler or Measuring Tape
TOOLS & PARTSTOOLS & PARTS
Parts Supplied:
Foot Boots (4) Leveling Legs (4) Security Cone Service Door Lock Assembly
(on some models) (on some models)
5/16" (8 mm) Hex Head – 3-Pin 60 Minutes Timing 6-Pin 30 Minutes Timing Coin Slide Decal Kit
18 x 2
1
⁄2" (63.5 mm) Security Bolt Cam (on some models) Cam (on some models) (on some models)
(on some models)
†®
TORX and T20 are registered trademarks of Acument Intellectual Properties, LLC.
$2.00
25 25 25
25 25 25 25
25 25 25 25 25
25 25 25 25 25 25
25 25 25 25 25 25 25
$1.75
$1.50
$1.25
$1.00
$0.75
25 25 25 25 25 25 25 25
$2.00
Slide extension (on some models)