Instruction Sheet

6
1� Check that all parts are now installed. If there is an extra
part, go back through the steps to see which step was
skipped.
2� Check that you have all of your tools.
3� Dispose of/recycle all packaging materials.
Electric Dryers
■ In the U�S�A�:
For power supply cord installations, plug into a grounded
(earthed) outlet. For direct wire installations, turn on power.
■ In Canada:
Plug into a grounded 4 prong outlet. Turn on power.
ASSISTANCE OR SERVICEASSISTANCE OR SERVICE
If you need assistance:
Contact the distributor where the washer or dryer was purchased. When you call, you will need the washer or dryer model number
and serial number. Both numbers can be found on the serial-rating plate located on your washer or dryer.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
COMPLETE INSTALLATIONCOMPLETE INSTALLATION
Washers & Gas Dryers
■ Plug into a grounded 3 prong outlet.