Installation Instruction

REVERSING DRYER DOOR SWING (OPTIONAL)REVERSING DRYER DOOR SWING (OPTIONAL)

4. Lift the inner door assembly off outer door assembly.

5. Remove 4 Phillips-head screws to release center insert from

outer door ring.

6. Lift and rotate center insert 180 degrees.

7. Reassemble the center insert and outer door ring with the

4 screws.

Reverse Hinge

1. Use a small at-blade screwdriver to remove 2 plug strips

from the inner door. Slide the head of the screwdriver under

the plugs, without scratching inner door surface, and lift

up strip.

2. Remove the 4 screws that attach to inner door hinge.

3. Move hinge to other side. Reinstall 4 screws.

4. Reinstall plug strips on opposite side of the inner door.

5. Check for ngerprints on the glass. Clean if necessary.