Installation Instruction

28
ELECTRONIC CONTROL SETUP INSTRUCTIONSELECTRONIC CONTROL SETUP INSTRUCTIONS
Code Explanation
8. 00 SPECIAL PRICE STOP HOUR
NOTE: Uses military time – 24 hours clock.
8. 00 This is the stop hour; select 0–23 hours. Select STOP
HOUR by pressing the COTTON/WHITES button.
• Press the PERM PRESS button once to advance to
next code.
9. 10 SPECIAL PRICE DAY
9. 10 This represents the day of the week and whether
special pricing is selected for that day. A number
followed by ‘0’ indicates no selection for that particular
day (9.10). A number followed by an ‘S’ indicates
selected for that day (9.1S).
Day of week (1–7) can be chosen by pressing the
COTTON/WHITES button. Press the COLORS/
DELICATES button once to select special pricing
for each day chosen.
When exiting set-up code ‘9.’, the display must show
current day of week:
DISPLAY DAY OF WEEK CODE (selected)
10 Day 1 = Sunday 1S
20 Day 2 = Monday 2S
30 Day 3 = Tuesday 3S
40 Day 4 = Wednesday 4S
50 Day 5 = Thursday 5S
60 Day 6 = Friday 6S
70 Day 7 = Saturday 7S
• Press the PERM PRESS button once to advance to
next code.
A. 00 VAULT VIEWING OPTION
This option is either SELECTED ‘ON’ or NOT
SELECTED ‘OFF’.
A. 00 Not Selected ‘OFF’.
A. SC Selected ‘ON’. Press the COLORS/DELICATES button
once for this selection. When selected, the money
and/or cycle counts will be viewable (if counting is
selected) when the coin box is removed.
• Press the PERM PRESS button once to advance to
next code.
b. 05 VALUE OF COIN 1
b. 05 This represents the value of coin 1 in number
of nickels: 05 = $0.25 (default for 9150 and 9160
models).
• By pressing the COTTON/WHITES button, there is
an option of 1–199 nickels.
• Press the PERM PRESS button once to advance
to next code.
b. 30 With coin slide activation, this represents the total
vend price in nickels. Example: b.30 is equal to $1.50.
Code Explanation
C. 20 VALUE OF COIN 2
C. 20 This represents the value of coin 2 in number
of nickels: 20 = $1.00.
• By pressing the COTTON/WHITES button, there is
an option of 1–199 nickels.
C. 05 When a Gen 2 card reader is used, this code represents
the value of top off in nickels. C.05 = $0.25.
• Press the PERM PRESS button once to advance
to next code.
d. 00 COIN SLIDE OPTION
This option is either Selected “ON” or Not Selected
“OFF.” Replacement of meter case will be needed for
coin slide mounting.
d. 00 Not Selected ‘OFF’.
d. CS Selected ‘ON’.
NOTE: This option needs to be set to ‘00’ unless the
meter case has been changed to accept a coin slide
device.
Press the COLORS/DELICATES button 3 consecutive
times for this selection. When coin slide mode is
selected, set ‘b.’ equal to value of vend price in
nickels. Set ‘6 XX’ (REGULAR CYCLE PRICE) and
‘3.XX’ (SPECIAL CYCLE PRICE) to number of slide
operations.
NOTE: If the installer sets up ‘CS’ on a coin drop
model, the dryer will not register coins inserted.
• Press the PERM PRESS button once to advance
to next code.
E. 00 ADD COINS OPTION
This option is either Selected ‘ON’ or Not Selected
‘OFF’. This option causes the customer display to
show the number of coins (coin 1) to enter, rather
than the dollars-and-cents amount.
E. 00 Not Selected ‘OFF’.
E. AC Selected ‘ON’.
Press the COLORS/DELICATES button 3 consecutive
times for this selection.
9160 MODELS ONLY: In enhanced debit mode, this
option is not selectable.
• Press the PERM PRESS button once to advance
to next code.
J. Cd PAYMENT MODE (COIN/DEBIT OPTION)
J. Cd Both coin and debit selected. Press the COLORS/
DELICATES button 3 consecutive times to change
this selection.
J. C_ Coins selected, debit disabled. Press the COLORS/
DELICATES button 3 consecutive times to change
this selection.
J. _d Debit Card selected, coin disabled (default for 9160
models). This selection must be used for free vend.
Press the COLORS/DELICATES button 3 consecutive
times to change this selection.
J. Ed Enhanced Debit is self-selected when a Generation
2 card reader is installed in the dryer. The “Ed” option
cannot be manually selected or deselected.
• Press the PERM PRESS button once to advance
to next code.