Instruction Sheet

4
4� Remove the outer console panel:
Washer:
Remove the 6 TORX T20 security screws attaching the
outer console panel to the control panel assembly.
7� Attach the card reader to the inside of the card reader bezel
per instructions from the card reader manufacturer.
8� Install the assembled card reader-bezel assembly into the
control panel and secure with the 2 screws in literature
package.
Dryer:
Remove the 8 TORX T20 security screws attaching the
outer console panel to the control panel assembly.
A
A
A. Card reader bezel and card reader
5� Remove the card reader slot cover. Discard card reader
slot cover. Dryer shown.
6� Remove the control panel assembly. Dryer shown.
9� Plug the wiring harness into the card reader and the card
reader port on the control board at AA3.
10� Reinstall the console panel assembly and outer control
panel by reversing steps 6 and 4, and for washers, 3.
Dryer shown.
11� Reinsert detergent dispenser assembly (washer only).
A. Card reader slot cover