Installation Instruction
27
ELECTRONIC CONTROL SETUP INSTRUCTIONSELECTRONIC CONTROL SETUP INSTRUCTIONS
Code Explanation
6. 06 REGULAR CYCLE PRICE
6. 06 When the d.xx is set to d.00, this 6.xx value represents
the number of coins (coin 1) needed to start the dryer;
may adjust from 0–39. Change this value by pressing
the COTTON/WHITES button. 6.06 = 6 coins = $1.50.
(9160 models default to 6.00.)
6. 01 When the d.xx is set to d.CS, this 6.xx value
represents the number of push-in actuations of the
coin slide to start the dryer. 6.01 would equal one coin
slide activation.
• Press the PERM PRESS button once to advance
to next code.
7. 05 REGULAR DRY TIME
7. 05 When set to Coin Drop or Card Reader operation, the
dry time equals the Regular Dry Time value multiplied
by the Regular Cycle Price value. Example: 6.06 and
7.05 = (06 x 05 = 30 minutes).
7. 45 For coinslide or OPL operation, the value is the
amount of minutes of dry time. Factory default of
45minutes. Pressing COTTON/WHITES adjusts the
value from 1–75 minutes.
• Press the PERM PRESS button once to advance
to next code.
8. 00 TYPE OF DRYER PRICING
8. 00 Fixed Cycle with Top Off. Only available for use with
coin drops or card readers. For detailed description,
see “General User Information.”
8. FC Fixed Cycle. For detailed description, see General
User Information. Use COLORS/DELICATES button
to make this selection.
• Press the PERM PRESS button once to advance
to next code.
9. 00 CYCLE COUNTER OPTION
This option is either NOT SELECTED “OFF”
or SELECTED “ON.”
9. 00 Not Selected “OFF.”
9. 0C Selected “ON” and not able to be deselected.
• Press the COLORS/DELICATES button
3 consecutive times to select “ON.” Once
selected “ON” it cannot be deselected.
• Press the PERM PRESS button once to advance
to next code.
1. 00 MONEY COUNTER OPTION
This option is either NOT SELECTED “OFF”
or SELECTED “ON.”
1. 00 Not Selected “OFF.”
1. 0C Selected “ON.”
• Press the COLORS/DELICATES button
3 consecutive times to select “ON” and 3
consecutive times to deselect (Not Selected “OFF”).
Counter resets by going from “OFF” to “ON.”
1. C0 Selected “ON” and not able to be deselected.
• To select “ON” and not able to be deselected,
rst select “ON;” then within 2 seconds press the
COLORS/DELICATES button twice, the COTTON/
WHITES button once, and exit set-up mode.
• Press the PERM PRESS button once to advance
to next code.
Code Explanation
2. 00 SPECIAL PRICING OPTIONS
This option is either SELECTED ‘ON’ or NOT
SELECTED ‘OFF’.
2. 00 Not Selected ‘OFF’.
2. SP Selected ‘ON’. Press the COLORS/DELICATES button
once for this selection.
If SPECIAL PRICING OPTION is selected, there is
access to codes ‘3.’ thru ‘9.’
• Press the PERM PRESS button once to advance to
next code.
OPTIONS TO USE IF SPECIAL PRICING IS
SELECTED:
3. 06 SPECIAL CYCLE PRICE
3. 06 Represents the number of quarters (coin 1) needed
to start the dryer; may adjust from 0–39. (See b.xx
setup for VALUE OF COIN 1). Advance from 0–39
by pressing the COTTON/WHITES button. Factory
default of 6 quarters = $1.50.
3. 00 Model 9160: Factory default of 0 quarters.
• Press the PERM PRESS button once to advance to
next code.
4. 05 SPECIAL DRY TIME
4. 05 Model 9150: Represents the number of minutes per
quarter (coin 1).
Factory default of 5 minutes per coin
Example: 6 quarters x 5 minutes = 30 minutes. By
pressing the COTTON/WHITES button, the value can
be adjusted from 1–75 minutes.
4. 45 Model 9160: Represents the xed cycle time in
minutes. As example: ‘4.45’ = 45 minutes.
• Press the PERM PRESS button once to advance to
next code.
5. 00 TIME-OF-DAY CLOCK, MINUTES
5. 00 This is the TIME-OF-DAY CLOCK, minute setting;
select 0–59 minutes by pressing the COTTON/WHITES
button.
• Press the PERM PRESS button once to advance to
next code.
6. 00 TIME-OF-DAY CLOCK, HOURS
NOTE: Uses military time – 24 hours clock.
6. 00 This is the TIME-OF-DAY CLOCK, hour setting;
select 0–23 hours by pressing the COTTON/WHITES
button.
• Press the PERM PRESS button once to advance to
next code.
7. 00 SPECIAL PRICE START HOUR
NOTE: Uses military time – 24 hours clock.
7. 00 This is the start hour; select 0–23 hours. Select START
HOUR by pressing the COTTON/WHITES button.
• Press the PERM PRESS button once to advance to
next code.