Installation guide

40
ELECTRONIC CONTROL SET-UP INSTRUCTIONS
Code Explanation
C. 20 VALUE OF COIN 2/
VALUE OF DRYER TOP OFF
C. 20 This represents the value of coin 2 in number of
nickels: 20 = $1.00. Increase between 1 and 200
nickels by pressing the middle left (COTTON/
WHITES) button, decrease by pressing the lower
left (HOT) button.
C. 05 9100 MODEL ONLY : For models using Enhanced
Debit, this eld represents the value of top off in
nickels, for the dryer, or $.25.
Factory default of C.05; represents 5 x $.05, or
$.25.
• Press the lower middle (WARM) button once
to advance to next code.
E. 00 ADD COINS OPTION
This option is either NOT SELECTED “00” or
SELECTED “AC.” This option causes the customer
display to show the number of coins (coin 1) to
enter, rather than the dollars-and-cents amount.
E. 00 Not Selected “00.”
E. AC Selected “AC.” Press the lower right (COLD)
button three consecutive times to change
this selection.
• Press the lower middle (WARM) button once
to advance to next code.
F. 00 ENHANCED PRICING OPTION
F. 00 Not Selected “00.”
F. SU Super Cycle pricing enabled. This option allows
customers to upgrade cycles by depositing
extra money. Set-up codes “H.” and “h.” will
be displayed only when this option is enabled.
Press the lower right (COLD) button for this
selection.
• Press the lower middle (WARM) button once
to advance to next code.
H. 01 SUPER CYCLE UPGRADE PRICE
(Skipped unless Super Cycle pricing is enabled.)
H. 01 This represents the number of coin 1 required
to upgrade a base cycle to a super cycle. Advance
from 0–39 by pressing the lower left (HOT) button.
• Press the lower middle (WARM) button once
to advance to next code.
h. 01 SUPER CYCLE TYPE
(Skipped unless Super Cycle pricing is enabled.)
h. 01 This represents the Super Cycle upgrade option.
Press the lower left (HOT) button to step through
upgrade options 1 through 3 as follows:
01 – enhanced wash, extra 3 minutes of wash
tumble in addition to the programmed
wash time.
02 – extra rinse for all cycles.
03 – both 01 and 02.
• Press the lower middle (WARM) button once
to advance to next code.
J. Cd PAYMENT MODE (COIN/DEBIT OPTION)
J. Cd Both coin and debit selected. Press the
lower right (COLD) button three consecutive times
to change this selection.
Code Explanation
J. C_ Coins selected, debit disabled. Press the
lower right (COLD) button three consecutive times
to change this selection.
J. _d With Card Payment System: Debit Card selected,
coins disabled. Press the lower right (COLD) button
three consecutive times to change this selection.
J. Ed Enhanced Debit is self-selected when a
Generation 2 card reader is installed in the washer/
dryer. The Ed option cannot be manually selected
or deselected.
• Press the lower middle (WARM) button once
to advance to next code.
L. 00 PRICE SUPPRESSION OPTION
This option causes the customer display to show
“ADD” or “AVAILABLE” rather than the amount of
money to add (used mainly in debit installations).
L. 00 Not Selected “00.”
L. PS Selected “PS.” Press the lower right (COLD)
button once to change this selection.
• Press the lower middle (WARM) button once
to advance to next code.
n. CE CLEAR ESCROW OPTION
When selected, money held in escrow for
30 minutes without further escrow or cycle
activity will be cleared.
n. 00 Not Selected “00.”
n. CE Selected “CE.” Press the lower right (COLD)
button once to change this selection.
• Press the lower middle (WARM) button once
to advance to next code.
U. 00 PENNY INCREMENT OFFSET (DRYER)
U. 00 This represents the penny increment price offset
used in Generation 2 (Enhanced Debit) models.
Choose from 0–4 pennies by pressing the upper
left (COTTON/WHITES) button.
• Press the lower middle (WARM) button once
to advance to next code.
U. 00 PENNY INCREMENT OFFSET (WASHER)
U. 00 This represents the penny increment price offset
used in Generation 2 (Enhanced Debit) models.
Choose from 0–4 pennies, increase value by
pressing the middle left (COTTON/WHITES) button,
decrease by pressing the lower left (HOT) button.
• Press the lower middle (WARM) button once
to advance to next code.
A1. 00 PREWASH LENGTH (WASHER)
A1. 00 This is the number of minutes of PREWASH.
Choose 00 to disable the prewash or select
between 2 and 7 minutes by pressing the
lower left (HOT) button.
• Press the lower middle (WARM) button once
to advance to next code.
END OF SET-UP PROCEDURES.
EXIT FROM SET-UP MODE
• Turn service switch key clockwise and remove or remove
manual set-up card.