user manual

7
Small loads and
sportswear
Quick Dry High
Medium
Low
Extra Low
Air Only
13 Wrinkle Shield
†
For small loads of 3-4 items
Any load
NOTE: Select Air
Only to dry foam,
rubber, plastic, or
heat-sensitive fabrics
Timed Dry High
Medium
Low
Extra Low
Air Only
40 Wrinkle Shield
†
Use to dry items to a damp level for items that
do not require an entire drying cycle. Select
a drying temperature based on the type of
fabrics in your load. If you are unsure of the
temperature to select for a load, select the
lower setting rather than the higher setting.
Small to medium
loads
Touch
Up (for
non-steam
models)
High
Medium
Low
Extra Low
Air Only
20 Wrinkle Shield
†
Use this setting to help smooth out wrinkles
from such items as garments packed in a
suitcase or garments wrinkled from being left
in the dryer.
Items to dry: Cycle: Temp: Default
Time:
Available
Options:
Cycle Details:
CYCLE GUIDE — MANUAL CYCLES
Settings and options shown in bold are default settings for that cycle. Not all features and cycles are available on all models.
Not all settings and options are available on each cycle. Default cycle times are estimated in minutes.
CYCLE GUIDE — STEAM CYCLES
Settings and options shown in bold are default settings for that cycle.
Not all settings and options are available on each cycle.
Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.
Load Size Recommendations
For best results, follow the load size recommendations noted for
each cycle.
Small load: Fill the dryer drum with 3-4 items,
not more than 1/4 full.
Medium load: Fill the dryer drum up to about 1/2 full.
Large load: Fill the dryer drum up to about 3/4 full.
Do not overload. Items need to tumble freely.
Adjusting drying time on Timed Dry Cycles
When you select a Timed Dry Cycle,
the default time appears in the display.
Use the Time Adjust buttons to increase
or decrease the time in 1 minute
increments. Press and hold to change
the time in 5 minute increments.
The maximum dry time is 90 minutes.
†
Or Wrinkle Shield
™
with Steam (on some models). Wrinkle Shield
™
with Steam is available only with High and Medium Temp settings.
Selecting the Temp
A High heat setting may be used for drying heavyweight
items such as towels and work clothes.
A Low to Medium heat setting may be used for drying
medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Use a no-heat (Air Only) setting for foam, rubber, plastic,
or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures
for various loads, refer to the care label directions.
†
Or Wrinkle Shield
™
with Steam (on some models). Wrinkle Shield
™
with Steam is available only with High and Medium Temp settings.
Mixed Loads Enhanced
Touch Up
High
Medium
22 Wrinkle Shield
†
Static Reduce
Extended high-heat drying cycle intended to
help sanitize items such as bedding, towels,
and baby wear. This cycle is not recommended
for all fabrics. For best results, run cycle to
completion, do not interrupt.
Shirts, blouses, and
slacks
Quick
Refresh
(on some
models)
High 12 Wrinkle Shield
†
Static Reduce
Offers stepped drying starting with High heat,
followed by Medium heat for enhanced fabric
care and energy savings.
Items to
refresh:
Cycle: Temp: Default
Time:
Available
Options:
Cycle Details: