Instruction for Use

6
Regularly clean the appliance using a cloth and a solution of warm water,
with some soft detergent, suitable for cleaning the inside of the
refrigerator compartment. Do not use abrasive detergents. To ensure
continuous and correct flow of defrost water, regularly clean the inside of
the draining hole on the back of the refrigerator near the fruit and
vegetable drawer, using the tool provided (see figure).
MAINTENANCE AND
CLEANING APPLIANCE
Connect the appliance to the electric power supply. The ideal temperatures for preserving food have
already been set at the factory.
The acoustic signal indicates that the temperature alarm has been activated: press and hold down the
"Acoustic alarm deactivation" button. Where applicable, insert the anti-bacterial and anti-odour filter
into the fan as indicated on the filter package (see Refrigeration Compartment section).
Note: After switching the appliance on, it will be necessary to wait for 4/5 hours before a temperature
suitable for a standard appliance load is reached.
FIRST USE
Compared with traditional light bulbs, LEDs are longer lasting, improve
internal visibility and are more environmentally friendly.
To replace LED lights contact our After-sales Service.
LED LIGHTS (depending on the model)
REPLACING THE LAMP
(depending on the model)
Before replacing the lamp disconnect the appliance from the
electric power supply.
1. Loosen the screw and remove the light diffuser.
2. The lamp inside the appliance has a bayonet mount; it
does not need unscrewing and should be removed by pulling
as shown by the arrow.
After replacing the lamps refit the diffuser and wait 5 minutes
before reconnecting the appliance.
Replace the lamp with one of the same type, available from our After-sales Service, or from authorised
dealers.

Summary of content (3 pages)