CSP2860TQ CSP2861TW SpecSheet

DRYER SPECIFICATIONS
MODELS CSP2860TQ
†
CSP2861TQ
††
GENERAL INFORMATION
Stainless steel look push-button console, powdered
paint cabinet, improved collar assembly featuring
cam lock console, taller profile and improved security
metercase integral with collar, two coin box and money
acceptor openings, T40 Torx® & Pin security included,
removable in-door lint filters. Upper and lower dryers
may use different money acceptors at the same time.
3-way venting upper dryer, 4-way lower dryer.
Dual Metercase Accepts the
Following Payment Systems:
Coin Slide
Retrofit Coin-Drop
Retrofit Card Reader
OPL Push-To-Start
Dual Metercase Accepts the
Following Payment Systems:
Coin Slide
Retrofit Coin-Drop
Retrofit Card Reader
OPL Push-To-Start
DRUM VOLUME 14.8 Cu. Ft.
(7.4 Cu. Ft. Per Drum)
14.8 Cu. Ft.
(7.4 Cu. Ft. Per Drum)
MOTOR Two 1/3-HP Motors with
Built-In Overload Protector,
5.9 Amps Max Rating
Two 1/3-HP Motors with
Built-In Overload Protector,
5.9 Amps Max Rating
ELECTRICAL REQUIREMENTS 3 or 4-Wire Nominal 240/208
Volt, 60 Hz, A.C. Standard
30 Amp Breaker/Fuse Branch
Circuit per Dryer Drum
(Subject to Local Codes)
Nominal 120 Volt, 60 Hz, A.C.
Standard 15 Amp Breaker/Fuse
Branch Circuit per Dryer Drum
HEATER TYPE Electric Gas*
HEATER/BURNER RATING
(Add 500 Watts Approx. for Motor on all Dryer Models)
2 Heaters Rated at 5600 Watts
per Dryer (11.2 KW Total)
2 Burner Assemblies Rated at
22,000 BTU per Dryer (44,000
BTU Total) Natural Gas
OPERATIONAL AMPERAGE
(Does Not Include Control or Gas Valve)
Motor – 4.0 Amps
No Load per Motor
8 Amps Total Heater 23.33
Amps @ 240V x 2, 54.66 Total
Motor – 4.0 Amps
No Load per Motor
8 Amps Total
SHIPPING WEIGHT (Estimate) 294 Lbs. 300 Lbs.
DIMENSIONS
Width – in. (cm) 27 (68.6 cm) 27 (68.6 cm)
Depth – in. (cm) 28.5 (72.39 cm) 28.5 (72.39 cm)
Height – in. (cm) 76.375** (194 cm) 76.375** (194 cm)
*Burner orifices are available for manufactured, natural, mixed and LP gas with varying BTU ratings. **Height at metercase top.
†
Power cords on electric models sold separately.
††
LP Conversion Kit: 49572A. Energy information is available online at www.whirlpoolcommerciallaundry.com/products
To Locate a Distributor Near You, Please Visit www.whirlpoolcommerciallaundry.com/distributor, or call 1-800-NO-BELTS
Whirlpool
®
Commercial Stack Dryers
Mechanical Controls
Featuring Mechanical Controls
COMMERCIAL STACK DRYERS
3-YEAR LIMITED PARTS
ONLY WARRANTY
For a period from the date of original purchase through
the time listed above, the designated parts that fail in
normal commercial use will be repaired or replaced free
of charge for the part itself, with the owner paying all
other costs, including labor, transportation and customs
duty. Chemical damage is excluded from all warranty
coverage. See complete warranty for details.
Exhaust Information
All dryers require the equivalent of a 4-inch diameter exhaust duct. Rigid metal duct is recommended.
Failure to properly exhaust the dryer will result in improper operation.
# of 90°
turns 4" Hood 2
1
⁄
2
" Hood
Maximum length of 4" diameter
rigid metal duct
0 64 Ft. 58 Ft.
1 54 Ft. 48 Ft.
2 44 Ft. 38 Ft.
3 35 Ft. 29 Ft.
4 27 Ft. 21 Ft.
FRONT VIEW
SIDE VIEW
BACK VIEW
27" & 29" Dryer Venting Requirements
Dimensions are for planning purposes
only. For complete information,
see installation instructions packed
with product.
TORX is a registered Trademark of Textron Industries, Inc.
®/™ ©2015 Whirlpool. All rights reserved.
WY150058 3/15