Installation Guide

30
ELECTRONIC CONTROL SETUP INSTRUCTIONS
Code Explanation
7. 00
SPECIAL PRICE START HOUR
NOTE: Uses military time or 24 hr. clock.
7. 00 This is the start hour; 0–23 hours.
■
Select START HOUR by pressing the WHITES
AND COLORS button.
■
Press the PERM. PRESS button once to
advance to next code.
8. 00
SPECIAL PRICE STOP HOUR
NOTE: Uses military time or 24 hr. clock.
8. 00 This is the stop hour; 0–23 hours.
■
Select STOP HOUR by pressing the WHITES
AND COLORS button.
■
Press the PERM. PRESS button once to
advance to next code.
9. 10
SPECIAL PRICE DAY
9. 10 This represents the day of the week and whether
special pricing is selected for that day. A number
followed by “0” indicates no selection that particular
day (9.10). A number followed by an “S” indicates
selected for that day (9.1S). Days of the week
(1–7) are selected by pressing the WHITES AND
COLORS button. Press the DELICATES button
once to select special pricing for each day chosen.
When exiting setup code “9,” the display must show the current
day of week:
DISPLAY DAY OF WEEK CODE (selected)
10 Day 1 = Sunday 1S
20 Day 2 = Monday 2S
30 Day 3 = Tuesday 3S
40 Day 4 = Wednesday 4S
50 Day 5 = Thursday 5S
60 Day 6 = Friday 6S
70 Day 7 = Saturday 7S
■
Press the PERM. PRESS button once to advance to
next code.
A. 00 VAULT VIEWING OPTION
This option is either NOT SELECTED “OFF” or
SELECTED “ON.”
A. 00 Not Selected “OFF.”
A. SC Selected “ON.”
■
Press the DELICATES button once to change
this selection. When selected, the money and/or
cycle counts will be viewable (if counter option(s)
is selected) when the coin box is removed.
■
Press the PERM. PRESS button once to
advance to next code.
Code Explanation
b. 05
VALUE OF COIN 1
b. 05 This represents the value of coin 1 in number of
nickels:
05 = $0.25.
■
By pressing the WHITES AND COLORS button,
there is an option of 1–199 nickels.
■
Press the PERM. PRESS button once to
advance to next code.
C. 20
VALUE OF COIN 2
C. 20 This represents the value of coin 2 in number of
nickels:
20 = $1.00.
■
By pressing the WHITES AND COLORS button,
there is an option of 1–199 nickels.
NON-COIN / CARD-READY MODELS ONLY: For
Non-Coin / Card-Ready models using Enhanced
Debit, this field represents the value of top off in
nickels.
NON-COIN / CARD-READY MODELS: Factory
preset for $0.25.
■
Press the PERM. PRESS button once to
advance to next code.
d. 00
COIN SLIDE OPTION
This option is either NOT SELECTED “OFF” or
SELECTED “ON.”
d. 00 Not Selected “OFF.”
d. CS Selected “ON.”
■
Press the DELICATES button three consecutive
times for this selection. When coin slide mode is
selected, set “b.” equal to value of slide in nickels.
Set “606” (REGULAR CYCLE PRICE) and
“3.06” (SPECIAL CYCLE PRICE) to number of
slide operations.
NOTE: If the installer sets up “CS” on a coin drop
model, it will not register coins.
■
Press the PERM. PRESS button once to
advance to next code.
E. 00
ADD COINS OPTION
This option is either NOT SELECTED “OFF” or
SELECTED “ON.” This option causes the customer
display to show the number of coins (coin 1) to
enter, rather than the dollars-and-cents amount.
The number in the display changes as the coins are
accepted
E. 00 Not Selected “OFF.”
E. AC Selected “ON.”
■
Press the DELICATES button three consecutive
times to change this selection.
NON-COIN / CARD-READY MODELS ONLY: In
enhanced debit mode, this option is not selectable.
■
Press the PERM. PRESS button once to
advance to next code.