Instruction for Use

ManualsBrandsWhirlpool ManualsDishwashersD 62 (SK)

Cleaning and special maintenance

The filter assembly

If you want consistent good results from your dishwasher,

you need to clean the filter assembly.

Thanks to the filter, the food particles are removed from the

wash water, allowing it to be recirculated during the cycle,

filtered perfectly. For this reason, it is a good idea to remove

the larger food particles

trapped inside the cup "C"

and semi-circular filter "A"

after each wash. All you

need to do is rinse them

under running water; to

remove the filter assembly,

pull the cup handle up-

wards. The entire filter as-

sembly, comprising a semi-

circular filter "A" and a

microfilter "B", should be

cleaned thoroughly once a

month.

To clean the filter and the microfilter, use a toothbrush.

Reassemble the two parts as shown in the figures below

and reinsert the whole assembly into the dishwasher, posi-

tioning it into its housing and pressing downwards.

The dishwasher is not to be used without filters. Improper

replacement of the filters may reduce the efficiency of the

wash and even damage your dishwasher.

Cleaning the sprayer arms

Food residue may become encrusted onto the sprayer arms

and block the holes where water comes out; check them on

a regular basis and clean them (see the Close-up View (in-

side) letters F-I).

Is there a problem?

Your dishwasher may not work or not function properly.

Before calling for assistance, let's have a look at what can

be done: you may have forgotten to press a button or for

some reason or another you haven't carried out a proce-

dure necessary for the appliance to operate correctly.

The dishwasher won't start

Have you checked:

whether the appliance is plugged in properly or whether

there is electricity in your home, or whether the dishwasher

door has been shut correctly or whether the ON-OFF button

is on "ON" and whether the tap has been turned on?

The dishwasher won't load any water

Have you checked:

whether the tap has been turned on and is well connected

to the hose or whether there is no water throughout your

home or whether the pressure of the water supply is suffi-

cient, whether the hose is bent or the filter on the water

supply hose is blocked?

The dishes are not clean

Have you checked:

whether the right amount of detergent is in the dispenser,

the wash cycle selected is suitable for the dishes loaded, or

whether the filter and the microfilter are clean and whether

the sprayer arms can turn freely?

The dishwasher won't drain

Have you checked:

whether the drain hose is bent?

Limescale deposits or a white film form on the dishes

Have you checked:

whether the lid on the salt container is closed properly or

whether the amount of rinse aid has been adjusted correctly?

If, despite all these checks, your dishwasher still won't work

and the trouble you are having persists, call your nearest

authorised service centre, mentioning the following infor-

mation:

- the type of malfunction

- the model mark (Mod….) and the serial number (S/N….)

indicated on the rating plate located on the inner door, to

one side.

Never call upon the services of unauthorised techni-

cians and always refuse spare parts that are not origi-

nals.