Instruction for Use

6
GB
How to start the dishwasher
To start a wash cycle…
1. Make sure the appliance is plugged into the power socket
in the wall.
2. Ensure the water tap has been turned on fully.
3. Load the dishes (see chapter entitled "loading the dishes")
4. Pour in the detergent (see chapter entitled "salt, deter-
gent and rinse aid").
5. Turn the knob situated on the right-hand side of the con-
trol panel anticlockwise until the reference notch on the knob
corresponds with the number or symbol for the cycle you
wish to set (have a look at the chapter entitled "Wash cycle
table").
6. Press the ON-OFF button and the respective ON-OFF indi-
cator light will come on. The wash cycle will now begin.
Cancelling or modifying a wash cycle in progress…..
Premise: a wash cycle in progress can only be modified if it
hasn't been running for long. Press the ON-OFF button and
the relative indicator light will come off. Turn the knob clock-
wise to the desired setting (see paragraph entitled "to start
a wash cycle"), then turn the appliance back on by pressing
the ON-OFF button.
Wash cycle modification buttons
"65°C" button
Press this button "E" with wash cycles 1 and 2 and the tem-
perature of the water is increased to 65°C. Use it if you have
to wash saucepans and dishes with dry caked-on food.
We do not recommend you use it for washing delicate items
as the high temperatures reached could make their surfaces
opaque or discolour the decorations.
If you have left out some dishes…
You can interrupt the wash cycle, if it has only just started,
by turning off the appliance (press the ON-OFF button) then
insert the dishes you had left out, taking care not to scald
yourself with the hot steam and then turn the dishwasher
back on. The wash cycle will start up from where it was
interrupted.
At the end of the wash cycle…..
When the knob stops turning and stops
at a STOP notch (see figure), the wash
cycle has finished. Turn the appliance off
by pressing the ON-OFF button, turn off
the water tap and open the door taking
care not to scald yourself with the hot
steam.
Wait a few minutes before removing the dishes: this way
you won't have to handle them while they're still hot and
more sensitive to shock, and they will also dry better.
Warning:
When you open the dishwasher door after the wash cycle
has just ended or is under way, take care not to scald your-
self with hot steam!
STOP