Instruction for Use

GB14

1. Control panel.

2. Grease filters (over the perimeter extraction panel).

3. lamps.

4. Telescopic flue.

5. Perimeter extraction panel.

Control panel

1. Motor ON/OFF

2. Speed selection (increase/decrease)

Indicator lights:

a. running at minimum extraction speed

b. running at medium extraction speed

c. running at maximum extraction speed

d. running at intensive extraction speed

NB = the intensive extraction speed is timed for 5 minutes, after which the

motor will revert to medium speed.

3. Light ON/OFF

NB = control backlighting brightness increases when the function is in use.

DESCRIPTION AND USE OF HOOD

- Disconnect the appliance from the power supply

Cleaning the perimeter extraction panel

Removal:

pull the panel (FRONT) firmly downwards.

Cleaning:

Clean the extraction panel as often as the grease filter.

The steel of the extraction panel has iXelium surface treatment.

To clean it, proceed as follows:

• Use a soft cloth (preferably microfiber) wetted with water or with a normal glass cleaner.

• Do not use paper towels, as they may leave marks and bits of paper on the panel.

• Do not use abrasive, corrosive or chlorine-based products, or steel wool.

• Do not use steam equipment.

• Do not use flammable products.

• Do not leave acid or alkaline substances such as vinegar, mustard, salt, sugar or lemon juice on the panel.

DO NOT USE ALCOHOL!

Fitting:

The panel must be fixed at the front, fitted in the special pins on the hood.

IMPORTANT: Always make sure the panel is firmly fixed in place.

ATTENTION

MAINTENANCE