Setup and user guide

ManualsBrandsWhirlpool ManualsDomestic AppliancesDDLX 70112

7Kg B

3h 6h 9h

30’

15’

60’

90’

extra

1. Gentle option

2. Dry plus option

3. Programme selector

4. Start/Pause button

5. Start delay button

6. Anti-crease indicator

7. Programme sequence indicator /

Start delay indicators

8. Failure indicators

1. Worktop

2. Control panel

3. Water tank

4. Door

5. Door handle

6. Door lter (behind door)

7. Bottom lter (behind ap)

8. Adjustable feet (4)

1. 2.

5. 4.

5.4.

PRODUCT DESCRIPTION

APPLIANCE

THANK YOU FOR PURCHASING A WHIRLPOOL

PRODUCT

To receive more comprehensive help and support, please

WWW

You can download the Safety Instructions and

the Use and Care Guide by visiting our website

docs . whirlpool . eu and following the

instructions on the back of this booklet.

Before using the appliance carefully read the Health and Safety guide.

DAILY REFERENCE

GUIDE

CONTROL PANEL

Summary of content (8 pages)

PAGE 1
EN DAILY REFERENCE GUIDE THANK YOU FOR PURCHASING A WHIRLPOOL PRODUCT To receive more comprehensive help and support, please register your product at www‌.‌whirlpool‌.‌eu‌/‌register WWW You can download the Safety Instructions and the Use and Care Guide by visiting our website docs‌.‌whirlpool‌.‌e u and following the instructions on the back of this booklet. Before using the appliance carefully read the Health and Safety guide. PRODUCT DESCRIPTION APPLIANCE 1. 1. Worktop 2. Control panel 3.
PAGE 2
FIRST TIME USE BEFORE USING THE DRYER CHECK DRAIN HOSE AND WATER TANK Make sure that the drain hose on the back of the dryer is fixed correctly, either to the dryer’s water tank (see picture), or to your domestic sewage system (see Installation guide). 2 Also make sure that the water tank is correctly inserted.
PAGE 3
EN DAILY USE WARNING See Use and Care Guide for more details on functions / see last page for information on how to obtain the Use and Care Guide Make sure that no lighters or matches remain in the laundry. 1. LOAD LAUNDRY Prepare your laundry according to the recommendations in section HINTS AND TIPS. Make sure that pockets are empty, fasteners closed and ribbons tied together. Open the door and load the laundry. Observe the maximum load sizes given in the PROGRAMME CHART. 2.
PAGE 4
HINTS AND TIPS Respect the care labels of your laundry; make sure that it is appropriate for being treated in a dryer. CARE LABELS The dots indicate the temperature degree for drying the laundry. EMPTY ALL POCKETS Objects like coins or keys can damage your laundry as well as the drum. Normal temperature Reduced temperature Do not tumble dry SAVING TIPS Always dry a full load; this optimizes the relative energy consumption.
PAGE 5
EN PROGRAMME CHART Programme Options Care labels Max load Gentle Dry plus Extra dry Cotton max Cupboard dry Iron dry Cotton max Extra dry Synthetics 3.5 Cupboard dry Iron dry Mixed 3.0 Wool finish 1.0 — — Big items 3.
PAGE 6
PROGRAMMES Make sure that your laundry is suitable to be treated in a tumble dryer. Refer to HINTS AND TIPS / Care labels. MIXED For drying mixed laundry loads made of cotton, linen, synthetic fibres and their blends. ECO COTTON For drying normally wet cotton laundry. Standard cotton programme, suitable to dry normal wet cotton laundry. Most efficient programme in terms of energy consumption for drying cotton laundry. The values on the Energy Label are based on this programme.
PAGE 7
EN CARE AND MAINTENANCE WARNING Switch off and unplug the dryer before doing any cleaning and maintenance. EMPTY WATER TANK AFTER EACH DRYING CYCLE Hold the handle and carefully pull out the water tank. Hold the full water tank with both hands. Empty the water and insert the container by pushing it back into place. Make sure that it is properly inserted. CLEAN DOOR FILTER AFTER EACH DRYING CYCLE Open the door and remove the door filter by pulling it upwards. Press the button to open the door filter.
PAGE 8
HOW TO OBTAIN THE USE AND CARE GUIDE > WWW Download the Use and Care Guide from our website docs‌.‌whirlpool‌.‌e u (you can use this QR code), specifying the product’s commercial code. > Alternatively, contact our Client After‑sales Service CONTACTING OUR AFTER‑SALES SERVICE You can find our contact details in the warranty manual. When contacting our Client After‑sales Service, please state the codes provided on your product’s identification plate.