Operating instructions DISHWASHER EN ES PL Contents Product Fiche, 2 English,1 Español, 15 Polski, 29 Precautions and advice, 3 General safety Disposal Saving energy and respecting the environment Installation and Assistance, 4-5 Positioning and levelling Connecting the water and electricity supplies Advice regarding the first wash cycle Technical data Description of the appliance, 6 Overall view Control panel DFP 58T1 Loading the racks, 7-8 Lower rack Cutlery basket Upper rack Adjusting the u
Product fiche GB Product Fiche Brand INDESIT Model DFP 58T1 Rated capacity in standard place settings (1) 14 Energy efficiency class on a scale from A+++ (low consumption) to D (high consumption) A+ Energy consumption per year in kWh (2) 295.0 Energy consumption of the standard cleaning cycle in kWh 1.04 Power consumption of the off-mode in W 0.5 Power consumption of the left-on mode in W 5.0 Water consumption per year in litres (3) 3080.
Precautions and advice This appliance was designed and manufactured in compliance with international safety standards The following information has been provided for safety reasons and should therefore be read carefully. Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or moved, please ensure the manual is kept with the machine. Please read these instructions carefully: they contain important information on installation, use and safety.
Installation and Assistance GB If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back. Positioning and levelling 1. Remove the appliance from all packaging and check that it has not been damaged during transportation. If it has been damaged, contact the retailer and do not proceed any further with the installation process. The hose should not be bent or compressed.
Anti-condensation strip* After installing the dishwasher, open the door and stick the adhesive transparent strip under the wooden shelf in order to protect it from any condensation which may form. Advice regarding the first wash cycle After the installation, remove the stoppers from the racks and the retaining elastic elements from the upper rack, if any.
Description of the appliance GB Overall view Upper rack Upper sprayer arm Tip-up dispensers Rack height adjuster Lower rack Lower sprayer arm Washing filter Salt dispenser Detergent dispenser, rinse-aid dispenser and Active Oxygen device* Data plate Control panel*** 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
Loading the racks Tips Before loading the racks, remove all food residues from the crockery and empty liquids from glasses and containers. No preventive rinsing is needed under running water. Arrange the crockery so that it is held in place firmly and does not tip over; and arrange the containers with the openings facing downwards and the concave/convex parts placed obliquely, thus allowing the water to reach every surface and flow freely.
GB Tip-up compartments with adjustable position The side tip-up compartments can be positioned at three different heights to optimize the arrangement of crockery inside the rack. Wine glasses can be placed safely in the tip-up compartments by inserting the stem of each glass into the corresponding slots.
Start-up and use Starting the dishwasher Measuring out the detergent 1. Turn the water tap on. 2. Press the ON/OFF button. 3. Open the door and pour in a suitable amount of detergent A good wash result also depends on the correct amount of detergent being used. Exceeding the stated amount does not result in a more effective wash and increases environmental pollution. (see below). 4. Load the racks (see Loading the racks) and shut the door. 5.
Wash cycles GB Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242. Based on the different conditions of use, the wash-cycle duration and data can change. The number and type of wash cycles and options may vary depending on the dishwasher model. Drying Options Wash Cycle Duration Water Consumption (l/cycle) Energy Consumption (kWh/cycle) 1. Eco Yes Delayed start – Tabs – Half Load 03:10’ 11 1,04 2.
Special wash cycles and Options Notes: Optimum performance levels when using the “Rapid” and “Sixty” cycles can be achieved by respecting the specified number of place settings. To reduce consumption even further, only run the dishwasher when it is full. Note for Test Laboratories: for information on comparative EN testing conditions, please send an email to the following address: assistenza_en_lvs@indesitcompany.
Rinse aid and refined salt GB Only use products which have been specifically designed for dishwashers. Do not use table/industrial salt or washing-up liquid. Follow the instructions given on the packaging. If using a multi-functional product it is not necessary to add any rinse aid. However, we recommend that you add salt, especially if you live in an area where the water is hard or very hard. (Follow the instructions given on the packaging).
Care and maintenance Shutting off the water and electricity supplies • Turn off the water tap after every wash cycle to avoid leaks. • Always unplug the appliance when cleaning it and when performing maintenance work. Cleaning the dishwasher • The external surfaces of the machine and the control panel can be cleaned using a non-abrasive cloth which has been dampened with water. Do not use solvents or abrasive products.
Troubleshooting GB Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance. Problem: Possible causes / Solutions: The dishwasher does not start or cannot be controlled. • Switch off the appliance by pressing the ON/OFF button, switch it back on after approximately one minute and reset the program. • The appliance has not been plugged in properly. • The dishwasher door has not been shut properly. The door won’t close. • The lock was released.
Manual de Instrucciones ES Español, 15 LAVAVAJILLAS Sumario Ficha del producto, 16 Precauciones y consejos, 17 Seguridad general Eliminación Ahorrar y respetar el medio ambiente Instalación y Asistencia, 18-19 Colocación y nivelación Conexiones hidráulicas y eléctricas Datos técnicos Advertencias para el primer lavado Asistencia DFP 58T1 Descripción del aparato, 20 Vista de conjunto Panel de mandos Cargar los cestos, 21-22 Cesto inferior Cesto de los cubiertos Cesto superior Regulación del cesto super
Ficha del producto ES Ficha del producto Marca INDESIT Modelo DFP 58T1 Capacidad nominal en número de cubiertos estándar (1) 14 Clase de eficiencia energética sobre una escala de A+++ (bajo consumo) a D (alto consumo) A+ Consumo energético anual en kWh (2) 295.0 Consumo energético del ciclo de lavado estándar en kWh 1.04 Consumo de potencia en el modo apagado en W 0.5 Consumo de potencia en el modo espera en W 5.0 Consumo de agua anual en litros (3) 3080.
Precauciones y consejos El aparato ha sido proyectado y fabricado en conformidad con las normas internacionales de seguridad Estas advertencias se suministran por razones de seguridad y deben ser leídas atentamente. Es importante conservar este manual para poder consultarlo en cualquier momento. En caso de venta, de cesión o de traslado, el manual debe permanecer junto al aparato. Lea atentamente las instrucciones: contienen información importante sobre la instalación, sobre el uso y sobre la seguridad.
Instalación y Asistencia Técnica ES En caso de traslado mantener el aparato en posición vertical; si fuera necesario inclinarlo, hacerlo hacia la parte posterior. Colocación y nivelación 1. Desembalar el aparato y comprobar que no haya sufrido daños durante el transporte. Si estuviera dañado, no conectarlo; llamar al revendedor. Conexión del tubo de descarga de agua Conectar el tubo de descarga, sin plegarlo, a una tubería de descarga con un diámetro mínimo de 4 cm.
Cinta anticondensación* Después de haber empotrado el lavavajillas, abra la puerta y pegue la cinta adhesiva transparente debajo de la superficie de madera para protegerla de una posible condensación. Advertencias para el primer lavado Después de la instalación, quite los tapones colocados en los cestos y los elementos elásticos de bloqueo del cesto superior (si existen). Inmediatamente antes del primer lavado, llene completamente de agua el depósito de sal y agregue aproximadamente 1 kg.
Descripción del aparato ES Vista de conjunto Cesto superior Rociador superior Cestos adicionales Regulación de la altura del cesto superior Cesto inferior Rociador inferior Filtro de lavado Depósito de sal Cubeta de detergente, depósito de abrillantador y dispositivo de Active Oxygen* Placa de características Panel de mandos*** 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
Cargar los cestos Sugerencias Antes de cargar los cestos, eliminar de la vajilla los residuos de alimentos y vaciar los vasos y las copas. No es necesario aclarar la vajilla con agua corriente. Disponer la vajilla de manera que quede firme y no se vuelque. Los recipientes deben colocarse con la abertura hacia abajo y las partes cóncavas o convexas en posición oblicua, para permitir que el agua alcance todas las superficies y fluya.
ES Cestos adicionales de posición variable Los cestos adicionales laterales se pueden colocar a tres alturas diferentes para optimizar la disposición de la vajilla en el cesto. Las copas se pueden colocar de forma estable en los cestos adicionales, introduciendo el pie en las ranuras correspondientes.
Puesta en funcionamiento y uso Poner en funcionamiento el lavavajillas Cargar el detergente 1. Abrir el grifo de agua. 2. Pulsar la tecla ON-OFF. 3. Abrir la puerta y dosificar el detergente (ver más abajo). 4. Cargar los cestos (ver Cargar los cestos) y cerrar la puerta. 5. Seleccionar el programa según la vajilla y su grado de suciedad (ver la tabla de programas) pulsando la tecla P. 6.
Programas ES Los datos de los programas se obtienen en condiciones de laboratorio según la Norma Europea EN 50242. La duración y los datos de los programas pueden variar según las distintas condiciones de uso. El número y el tipo de programas y opciones varían según el modelo de lavavajillas. Secado Opciones Duración del programa Consumo de agua (l/ciclo) Consumo de energía (kWh/ciclo) 1. Eco* Sí Inicio diferido - Media carga - Tabs 03:10’ 11 1,04 2.
Programas especiales y opciones Notas: las mejores prestaciones de los programas "Rápido 30’ y Sixty " se obtienen preferiblemente respetando la cantidad de cubiertos especificados. Para consumir menos use el lavavajillas a plena carga. Nota para los laboratorios de pruebas: para obtener información detallada sobre las condiciones de la prueba comparativa EN, escribir a la siguiente dirección: ASSISTENZA_EN_LVS@indesitcompany.
Abrillantador y sal regeneradora ES Utilizar sólo productos específicos para lavavajillas. No utilizar sal de cocina o industrial ni detergentes para lavar a mano. Seguir las indicaciones del envase. Si se utiliza un producto multifunción, no es necesario agregar abrillantador, pero se aconseja añadir sal, especialmente si el agua es dura o muy dura. (Seguir las indicaciones del envase.
Mantenimiento y cuidados Interrumpir el agua y la corriente eléctrica • Cerrar el grifo de agua después de cada lavado para prevenir el riesgo de pérdidas. • Desconectar la clavija de la toma de corriente para la limpieza y los trabajos de mantenimiento. Limpiar el lavavajillas • La superficie externa y el panel de control se pueden limpiar con un paño no abrasivo humedecido con agua. No utilizar disolventes ni productos abrasivos.
Anomalías y soluciones ES Si el aparato presenta anomalías de funcionamiento, controlar los siguientes puntos antes de llamar al Servicio de Asistencia Técnica. Anomalías: Posibles causas / Solución: El lavavajillas no arranca o no responde a los mandos • A pagar la máquina con la tecla ON/OFF, volver a encenderla después de un minuto aproximadamente y elegir el programa. • El enchufe no está bien introducido en la toma de corriente. • La puerta del lavavajillas no está bien cerrada.
Instrukcja obsługi PL Polski, 29 ZMYWARKA Spis treści Karta produktu, 30 Zalecenia i środki ostrożności, 31 Bezpieczeństwo ogólne Utylizacja Oszczędność i ochrona środowiska Instalacja i serwis, 32-33 Ustawienie i wypoziomowanie Połączenie hydrauliczne i elektryczne Dane techniczne Przed pierwszym użyciem Serwis Opis urządzenia, 34 Widok ogólny Panel sterowania Napełnianie koszy, 35-36 DFP 58T1 Kosz dolny Koszyk na sztućce Kosz górny Regulacja górnego kosza Uruchomienie i użytkowanie, 37 Uruchomien
Karta produktu PL Karta produktu Marka INDESIT Nazwa modelu DFP 58T1 Pojemność znamionowa, wyrażona liczbą standardowych kompletów naczyń (1) 14 Klasa efektywności energetycznej, skla od A+++ (niskie zużycie) do D (wysokie zużycie) A+ Zużycie energii w kWh rocznie (2) 295.0 Zużycie energii w standardowym cyklu zmywania w kWh 1.04 Zużycie energii w trybie wyłączenia i trybie czuwania w W 0.5 Zużycie energii w trybie włączenia i trybie czuwania w W 5.
Zalecenia i środki ostrożności Niniejsze urządzenie zostało zaprojektowane i wyprodukowane zgodnie z międzynarodowymi normami bezpieczeństwa. Poniższe ostrzeżenia podane zostały ze względów bezpieczeństwa i należy je uważnie przeczytać. Należy zachować niniejszą książeczkę instrukcji dla przyszłych konsultacji. W przypadku sprzedaży, odstąpienia lub przeprowadzki należy dopilnować, aby została przekazana wraz z urządzeniem nowemu właścicielowi.
Instalacja Serwis Techniczny W przypadku przenoszenia należy trzymać urządzenie w pozycji pionowej; w razie konieczności przechylić je do tyłu. PL Ustawienie i wypoziomowanie 1. Rozpakować urządzenie i sprawdzić, czy nie zostało uszkodzone podczas transportu. Jeśli okazałoby się uszkodzone, nie podłączać go, lecz skontaktować się ze sprzedawcą. Podłączenie węża odprowadzającego wodę Podłączyć przewód odprowadzający, nie zginając go, do przewodu kanalizacyjnego o średnicy minimum 4 cm.
Pasek antykondensacyjny* Po zabudowaniu zmywarki otworzyć drzwi i przykleić przezroczysty pasek samoprzylepny pod drewnianym blatem, aby zabezpieczyć go przed ewentualnymi skroplinami. Ostrzeżenia dotyczące pierwszego mycia Po zainstalowaniu, należy zdjąć elementy ochronne z koszy oraz gumki przytrzymujące kosz górny (jeśli je zastosowano).
Opis urządzenia Widok ogólny PL 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
Ładowanie koszy Zalecenia Przed napełnieniem koszy, usunąć z naczyń resztki żywności i opróżnić szklanki oraz kieliszki z pozostałych w nich płynów. Nie jest konieczne płukanie naczyń pod bieżącą wodą. Umieścić naczynia w sposób taki, by były one unieruchomione i się nie przewracały; pojemniki powinny być ułożone w sposób taki, by otwór znalazł się na dole, a części wklęsłe lub wypukłe w pozycji pochylonej, umożliwiając dopływ wody do wszystkich powierzchni oraz jej swobodny odpływ.
Półeczki o różnym stopniu nachylenia PL W celu jak najlepszego rozmieszczenia naczyń w koszyku możliwe jest ustawienie półeczek na trzech różnych wysokościach Kieliszki można ustawiać w bezpieczny sposób dzięki półeczkom, wsuwając nóżkę kieliszka w odpowiednie otwory.
Uruchomienie i użytkowanie Uruchomienie zmywarki 1. Otworzyć zawór wody. 2. Nacisnąć przycisk ON-OFF. 3. Otworzyć drzwiczki i wprowadzić odpowiednią ilość detergentu (zob. poniżej). 4. Załadować kosze (zob. Ładowanie koszy) i zamknąć drzwi. 5. Wybrać program w zależności od rodzaju naczyń i od stopnia ich zabrudzenia (zob. tabela programów) naciskając przycisk P. 6. Wybrać opcje mycia* (zob. Programy specjalne i opcje). 7.
Programy Dane programów są mierzone w warunkach laboratoryjnych zgodnie z europejską normą EN 50242. W zależności od poszczególnych warunków użytkowania, czas trwania oraz dane programów mogą się zmieniać. PL Liczba i rodzaj programów i opcji zmieniają się w zależności od modelu zmywarki. Suszenie Opcje Czas trwania programu Zużycie wody (l/cykl) Zużycie energii (KWh/cykl) 1. Eco* Tak Opóźniony start - Połowa wsadu - Tabs 03:10’ 11 1,04 2.
Programy specjalne i opcje Uwagi: najlepszą skuteczność działania programów “Fast i Express 30’” uzyskuje się przestrzegając zaleceń dotyczących ilości wkładanych naczyń. Aby zmniejszyć zużycie wody i energii, staraj się uruchamiać zmywarkę, gdy jest całkowicie wypełniona. Uwaga dla laboratoriów testowych: szczegółowe informacje dotyczące warunków testów porównawczych EN można uzyskać pod adresem: ASSISTENZA_EN_LVS@indesitcompany.
Płyn nabłyszczający i sól ochronna Stosować wyłącznie produkty przeznaczone do zmywarek. Nie używać soli kuchennej i przemysłowej ani detergentów do zmywania ręcznego. Stosować zgodnie z zaleceniami podanymi na opakowaniu. PL W przypadku użycia produktu wielofunkcyjnego nie ma konieczności stosowania płynu nabłyszczającego, zaleca się natomiast dodanie soli, zwłaszcza gdy woda jest twarda lub bardzo twarda. (Stosować zgodnie z zaleceniami podanymi na opakowaniu).
Konserwacja i utrzymanie Wyłączanie wody i prądu elektrycznego • Zakręcać zawór wody po każdym zmywaniu, aby uniknąć niebezpieczeństwa wycieków. • Wyjmować wtyczkę z kontaktu przed przystąpieniem do czyszczenia urządzenia oraz podczas czynności konserwacyjnych. Czyszczenie zmywarki • Obudowa zewnętrzna i panel sterowania mogą być czyszczone miękką ściereczką zwilżoną wodą. Nie należy stosować rozpuszczalników ani środków ściernych.
Anomalie i środki zaradcze Jeśli w pracy urządzenia pojawiają się anomalie w pracy, należy skontrolować następujące punkty przed zwróceniem się do Obsługi technicznej (patrz Obsługa techniczna). Niektóre z usterek są sygnalizowane za pomocą lampek zapalających się na panelu sterowania. Przed wezwaniem pomocy technicznej należy zanotować, które z lampek świecą.
PL 43
195116237.