Instruction for Use

23
7.
Unscrew the fixing screws securing the right and left
hinges, remove them and refit them on opposite sides
(Fig. 7). Refit the top panel, following the same steps as at
points 6 and 5.
8.
Position the bushings and top covers from the right hand
side on the left (Fig. 8 and 9). Remove the bottom right
bushing and fit it on the left (Fig. 8 and 9).
9.
Refit the central hinge by rotating it 180°. Refit the 2 doors
on the central hinge, following the same steps as at point
2. Secure the hinge with the 2 screws (Fig. 10).
Fig. 7
Fig. 8
Fig. 9
Fig. 10
6gb33042.fm Page 23 Friday, July 9, 2004 2:51 PM