Setup and user guide

4
Respect the care labels of your laundry; make sure that it is
appropriate for being treated in a dryer.
CARE LABELS
The dots indicate the temperature degree for drying the laundry.
Normal temperature
Reduced temperature
Do not tumble dry
EMPTY ALL POCKETS
Objects like coins or keys can damage your laundry as well as the
drum.
ADAPTING THE DRYER TO WATER CONDUCTIVITY
The drying results are aected by the conductivity of the water used
during washing. If, by modifyingthe available dryness levels (iron
dry; cupboard dry; extra dry), you are not satised withthe nal
drying results, you can adapt the water conductivity level. The dryer
comes with preset level 2. Choose between level 1 (most damp
results) and 5 (most dry results).
Press and hold the Programme button until the Conductivity
Adjustment symbol on the display blinks.
Turn the knob to adjust the level (1 –2 – 3 – 4 - 5).
Press the knob to conrm the selected level.
This operation is not needed for every drying cycle. Once the most
satisfying water conductivity level has been identied, you no
longer need to modify it.
Always dry a full load; this optimizes the relative energy
consumption. The maximum load sizes for the various programmes
are indicated in the programme chart.
To reduce the drying time, make sure that the laundry is spun with
the maximum possible spin speed of the wash programme. This
reduces the moisture content in the laundry.
HINTS AND TIPS
SAVING TIPS
Programme Load
(Kg)
Spin Speed - Washer
(rpm)
Humidity
(%)
Drying Time - Approximate
(min)
eCOTTON * 8 90 200
eCOTTON
8
8
800
1400
70
50
160
120
COTTON IRON DRY
8
8
8
800
1000
1400
70
60
50
130
120
100
SYNTHETICS CUPBOARD DRY 3.5 1000 40 50
CONSUMPTION DATA
Data can dier in your home, mainly depending on the moisture
content of the laundry load.
*Test programme according to AS/NZS2442.2 standard. Tested with
maximum rated load capacity and dryness level Cupboard dry
Values are based on the default programme setting, with clean door
and bottom lter. For consumer tests, the door lter and bottom
lter need to be cleaned after each cycle.
The drying time may dier from the values above. They depend on
the operation conditions in your home (such as voltage uctuation,
mixture of textiles, humidity of the textiles after spinning, load
volume) and settings.